Ubuntu dapper ph

From

Revision as of 13:16, 18 August 2009 by Perspectoff (Talk | contribs)
(diff) ← Older revision | Current revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Image:Ubuntuguide_logo.png

Unofficial Ubuntu 6.06 (Dapper Drake) Starter Guide

Ang guide na ito http://ubuntuguide.org/ ay sinimulan ni Chua Wen Kiat (Kuala Lumpur, Malaysia). Eto ngayon ay pinangangalagaan ng Linux Center of University of Latvia, at lahat ng gustong makibahagi dito.


Contributors: Orvils, Quash, Manicka, Jiyuu0, Cargo, Byte, krampo, Simos, Stubby, eljaco, shai, ThunderM, Hasile, adammichaelroach, Belisarivs, Cheator...


Ang guide na ito ay pwedeng talakayin sa opisyal na UbuntuGuide.org Forum sa ubuntuforums.org. Stop by at sumali sa talakayan.


Subalit, dahil sa wiki-vandalism, ang mga nakarehistrong users lamang ang pwedeng magbago sa wiki na ito, at ang nga nakarehistrong users lamang and pwedeng gumawa ng account para sa iyo. Kung gusto niyong sumali at tumulong, ipaalam niyo lang sakin [ orvils _at_ gmail _dot_ com ]. Wag kalimutang sabihin ang username na gusto niyo.

Mas lumang Bersyon: Ubuntu 5.10 (Breezy Badger):


Contents


Mga Pangkalahatang Pansin

  1. Ito ay isang di-opisyal na Ubuntu 6.06 (Dapper Drake) Starter Guide. Hindi ito nakaugnay sa Ubuntu at Canonical Ltd.
  2. Ang patnubay na ito ay maaaring talakayin sa opisyal na UbuntuGuide.org Forum sa ubuntuforums.org. Bumisita at sumali sa talakayan.
  3. Itong patnubay ay sinubukan sa kumpletong installation ng Ubuntu 6.06 x86 Install CD (Dapper Drake)
  4. Kung may makita kayong mala-asul na kahon, ibig sabihin ay kailangang isagawa ang mga command sa Terminal mode (Applications -> System Tools -> Terminal) o kaya gamitin ang nilalaman ng kahon tulad ng binanggit sa ibang tagubilin.
  5. Para mabawasan ang mga pagkakamaling dulot ng maling pagpindot, kopyahin at i-paste ang mga command sa Terminal mode (i-right click sa mga command -> "Copy" or "Paste". Pwede ring gamitin ang Ctrl+C parang magkopya at Shift+Insert para mag-paste)
  6. Ibig sabihin ng "sudo" ay superuser do. "sudo" ay magtatanong ng "Password:". Pakitype lang ang user password.
  7. Kung gusto niyo ng mas maraming impormasyon tungkol sa kahit anong command, tignan lamang ang pahina sa manwal gamit ang "man" na command. Kunwari, ang "man sudo" ay magpapakita ng pahina sa manwal para sa "sudo" na command.
  8. Kung napapagod ka na sa kaka-type ng "apt-get", basahin ang #How to apt-get the easy way (Synaptic)
  9. "apt-get" at "wget" ay nangangailangan ng koneksyon sa Internet para mag install/update/download ng mga programa
  10. Para magdownload ng file, i-right click ang link -> Piliin ang "Save Link As..." -> Siguraduhing tama ang filename at extension
  11. Kung gusto mong tumulong sa pagsalin sa iyong wika o kaya ay tumulong sa Ubuntu sa iba pang paraan, bisitahin ang https://launchpad.net/
  12. Ang espiritu ng "humanity to others" nawa ay pumalaging kasama mo...


Kung gumamgamit ka ng Kubuntu hindi na kailangang mag-install ng Gedit, dahil ngayon ay may symbolic link na mula "gedit" sa "kate", para magamit mo ang lahat ng mga command sa baba ng walang problema. Siya nga pala, kung gusto niyong gamitin ang gedit bilang editor mo, gawin:
sudo apt-get install gedit
Kung hindi gumagana ang "gedit" command (symbolic link), pwede ka ring gumawa nito:
sudo ln -s /usr/bin/kate /usr/bin/gedit
Kung gumagamit ka ng 64-bit na bersyon palitan ang kahit anong "i386" ng "amd64"

Getting Started

Ano Ang Ubuntu

Anong Bago Sa Ubuntu 6.06 Dapper Drake

Saan makikita ang mga Ubuntu screenshots / screencast

Videos

Saan makikita ang mga Kubuntu screenshots / screencast

Videos

http://osvids.com/files/page3-108-pop.html

Saan makikita ang listahan ng lahat ng programa/library na kasama sa Ubuntu

Saan maaaring magdownload ng Ubuntu

Saan makaka-order ng Ubuntu CD ng LIBRE

Please note that CDs may take four to six weeks to deliver. Inaanyayahan kayong i-copy, baguhin, at ipalaganap ang mga disk as much as possible.

Saan makakakita ng tulong para sa Ubuntu

Saan makakahanap ng mga bagong programa

Saan maghahanap ng mga bagong style elements para sa iyong desktop

Mga Repositoryo

Paano magdagdag ng mga karagdagang repositoryo

sudo cp -p /etc/apt/sources.list /etc/apt/sources.list_backup
sudo gedit /etc/apt/sources.list
  • Palitan lahat ng sumusunod
Para gamitin ang iyong lokal na mirror maaaring idagdag ang "cc." bago ang archive.ubuntu.com (cc = ang code ng iyong bansa)
hal. deb http://lv.archive.ubuntu.com/ubuntu dapper main restricted universe multiverse
## Magdagdag ng komento (##) sa kahit anong linya para di ito icheck.   
## Gamitin ang sumusunod na sources.list at your own risk.  

deb http://archive.ubuntu.com/ubuntu dapper main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu dapper main restricted universe multiverse

## MAJOR BUG FIX UPDATES produced after the final release
deb http://archive.ubuntu.com/ubuntu dapper-updates main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu dapper-updates main restricted universe multiverse

## UBUNTU SECURITY UPDATES
deb http://security.ubuntu.com/ubuntu dapper-security main restricted universe multiverse
deb-src http://security.ubuntu.com/ubuntu dapper-security main restricted universe multiverse

## BACKPORTS REPOSITORY (Unsupported.  May contain illegal packages.  Use at own risk.)
deb http://archive.ubuntu.com/ubuntu dapper-backports main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu dapper-backports main restricted universe multiverse

## PLF REPOSITORY (Unsupported.  May contain illegal packages.  Use at own risk.)
deb http://packages.freecontrib.org/plf dapper free non-free
deb-src http://packages.freecontrib.org/plf dapper free non-free                                               
                                                                                                                                          
## CANONICAL COMMERCIAL REPOSITORY (Hosted on Canonical servers, not Ubuntu
## servers. RealPlayer10, Opera and more to come.) 
deb http://archive.canonical.com/ubuntu dapper-commercial main
  • i-save ang inedit na file
sudo apt-get update
  • Maaari mo ring palitan ang iyong sources.list nitong napakakumpletong listahan: sources.list (siguraduhing palitan ang "it" sa "it.archive.ubuntu.com" ng iyong country code. Use at own risk.
  • Baguhin lamang ang default Ubuntu sources.list kung naiintindihan mo ang iyong ginagawa. Ang pagkakahalo ng mga repositoryo ay maaaring sanhi ng pagkasira.

Ubuntu Updates

Paano Manu-Manong I-update Ang Ubuntu

sudo apt-get update
sudo apt-get upgrade

O Kaya

Gamitin ang Update Manager: System -> Administration -> Update Manager

Mga Karagdagang Application

Paano Gamitin Ang Easy Ubuntu

  • Basahin ang #Mga Pangkalahatang Pansin
  • Ang Easy Ubuntu ay isang maliit at diretsahang utility that allows novice users na madaling mag-install ng iba't ibang content para sa Ubuntu tulad ng media codecs, fonts, Macromedia Flash at Sun Java.
wget http://easyubuntu.freecontrib.org/files/easyubuntu-3.021.tar.gz
tar -zxf easyubuntu-3.021.tar.gz
cd easyubuntu
sudo python easyubuntu.in
  • Mula sa Easy Ubuntu window, i-check ang naaangkop ng box para i-download at i-install ang content sa Ubuntu.
  • Paunawa: Ang mga gumagamit ng naunang EasyUbuntu 3.0 na bersyon ay maaaring makaranas ng problema sa pag-install ng Flash and Java.

Paano maginstall ng Automatix sa Ubuntu, Kubuntu, at Xubuntu

  • Basahin ang #Mga Pangkalahatang Pansin
  • Ang Automatix ay isang graphical interface para sa automatic na installation ng pinaka-karaniwang application na hinihiling sa Ubuntu/Kubuntu/Xubuntu linux.
  • Paunawa: Bago maginstall, unawain na ang ibang mga codec na dala nito sa ibang software ay maaaring ipinagbabawal a ibang bansa. Ikaw ang may responsibilidad na ang mga batas na ito ay hindi masaway.
  • gamit ang iyong paboritong text editor (kwrite, gedit)
sudo kwrite /etc/apt/sources.list
  • Tanggalin ang comment sa mga sumusunod na linya
#deb http://archive.ubuntu.com/ubuntu dapper main
#deb-src http://archive.ubuntu.com/ubuntu dapper main
  • Kung gumagamit ka ng Ubuntu o Xubuntu Dapper, idagdag ang mga sumusunod na linya sa dulo ng file.
deb http://www.getautomatix.com/apt dapper main
  • Kung gumagamit ka ng Kubuntu, idagdag ang mga sumusunod na linya sa dulo ng file.
deb http://www.getautomatix.com/apt kubuntu main 
  • I-save ang file at isara.
  • Kumuha ng GPG key
wget http://www.getautomatix.com/apt/key.gpg.asc
gpg --import key.gpg.asc
gpg --export --armor 521A9C7C | sudo apt-key add -

  • Patakbuhin ang mga sumusunod na command para maginstall ng Automatix
sudo apt-get update
sudo apt-get install zenity
sudo apt-get install automatix

  • Ang Automatix ay maaaring simulan sa command line
automatix
  • Madadagdag rin ito sa Menu
Menu>System>Automatix-Kubuntu

Paano maginstall ng Clipboard Daemon para sa GNOME

wget -c http://easylinux.info/uploads/gnome-clipboard-daemon-1.0.bin.tar.bz2
sudo tar jxvf gnome-clipboard-daemon-1.0.bin.tar.bz2 -C /usr/bin/
sudo chown root:root /usr/bin/gnome-clipboard-daemon
sudo chmod 755 /usr/bin/gnome-clipboard-daemon
sudo gnome-clipboard-daemon &
export EDITOR=gedit && crontab -e
  • Idagdag ang linyang nasa baba sa dulo ng file
@reboot gnome-clipboard-daemon
  • Isave ang nabagong file

Paano maginstall ng J2SE Runtime Environment (JRE) na may Plug-in para sa Mozilla Firefox

sudo apt-get install sun-java5-jre sun-java5-plugin
  • Kapag tinanong, sumangayon DLJ license terms.
  • Para i-configure ang J2SE bilang default JVM (kailangan para sa mga programang tulad ng Frostwire, RSSOwl at para sa plugin para sa Mozilla Firefox):
sudo update-alternatives --config java

Pagkatapos ay piliin ang option na tumutugma sa J2SE.

Paano maginstall ng Flash Player (Macromedia Flash) Plug-in para sa Mozilla Firefox

sudo apt-get install flashplugin-nonfree
sudo update-flashplugin
  • I-restart ang Mozilla Firefox

Paano mag-install ng PDF Reader (Adobe Reader) na may Plug-in para sa Mozilla Firefox

sudo apt-get install acroread
sudo apt-get install mozilla-acroread
sudo apt-get install acroread-plugins

Paano maginstall ng Download Manager (Downloader for X)

sudo apt-get install d4x

Paano maginstall ng FTP Client (gFTP)

sudo apt-get install gftp

Paano maginstall ng File share utility (DC++)

wget -c http://easylinux.info/uploads/linuxdcpp.tar.gz 
sudo tar zxvf linuxdcpp.tar.gz -C /opt
sudo gedit /usr/share/applications/dcpp.desktop
  • Idagdag ang sumusunod na linya sa bagong file
[Desktop Entry]
Encoding=UTF-8
Name=DC++
Exec=/opt/linuxdcpp/ldcpp
Terminal=false
Type=Application
StartupNotify=true
Icon=/opt/linuxdcpp/pixmaps/linuxdcpp.svg
Categories=Application;Network;
  • I-save ang nabagong file
  • Applications -> Internet -> DC++

Paano maginstall ng P2P BitTorrent Client (Azureus)

sudo apt-get install azureus
  • Applications -> Internet -> Azureus

Paano maginstall ng P2P BitTorrent Client (Bittornado)

sudo apt-get install bittornado
sudo apt-get install bittornado-gui
  • Applications -> Internet -> Bittornado Client

Paano maginstall ng P2P eMule Client (aMule)

sudo apt-get install amule

Paano maginstall ng P2P Gnutella Client (FrostWire)

wget -c http://www.users.on.net/~stubby/FrostWire-4.10.9-2.i586.deb
sudo dpkg -i FrostWire-4.10.9-2.i586.deb
  • Applications -> Internet -> FrostWire

Paano maginstall ng Messenger (Skype)

sudo gedit /etc/apt/sources.list
  • Idagdag ang mga sumusunod na linya sa dulo ng file
## Repository for Skype
deb http://download.skype.com/linux/repos/debian/ stable non-free
  • I-save ang nabagong file
sudo apt-get update
sudo apt-get install skype
  • Applications -> Internet -> Skype

How to install WinPopup (LinPopUp)

sudo apt-get install linpopup
sudo gedit /usr/share/applications/linpopup.desktop
  • Idagdag ang sumusunod na linya sa bagong file
[Desktop Entry]
Name=LinPopUp
Comment=LinPopUp
Exec=linpopup
Icon=/usr/share/pixmaps/linpopup.xpm
Terminal=false
Type=Application
Categories=Application;Utility;

Paano maginstall ng Multimedia Codecs

Stubby Lahat ng nalalamang codecs ay gumagana maliban sa wmv

sudo apt-get install gstreamer0.10-ffmpeg gstreamer0.10-gl gstreamer0.10-plugins-base
sudo apt-get install gstreamer0.10-plugins-good gstreamer0.10-plugins-bad
sudo apt-get install gstreamer0.10-plugins-bad-multiverse gstreamer0.10-plugins-ugly 
sudo apt-get install gstreamer0.10-plugins-ugly-multiverse

Paano Maginstall Ng Kakayahang Mag-play ng DVD

ironss: gstreamer dvd plugin ay makukuhang bahagi ng plugins-bad (or ugly?) and does not work reliably. Subalit, ang Totem ay gumagana gamit ang xine backend para mag-play ng mga DVD. This will keep you going until gstreamer gets dvd playback. Pansinin na hindi kailangang mag-install ng xine-ui o mplayer as suggested in

sudo apt-get install libdvdread3 
sudo /usr/share/doc/libdvdread3/examples/install-css.sh
sudo apt-get install totem-xine

Stubby: gstreamer dvd plugin ay di pa na-port sa dapper. ang susunod na direksyon ay hindi gagana ng maayos.

sudo apt-get install libdvdcss2

Paano maginstall ng Multimedia Player (xine-ui)

sudo apt-get install xine-ui libxine-extracodecs
  • Iugnay ang xine-ui para magplay multimedia files
gconftool-2 --type string --set /desktop/gnome/volume_manager/autoplay_dvd_command "xine dvd://"
sudo rm -f /usr/share/applnk/Multimedia/xine.desktop
sudo ln -fs /usr/share/xine/desktop/xine.desktop /usr/share/applications/
sudo cp /usr/share/applications/defaults.list /usr/share/applications/defaults.list_backup
sudo sed -e 's/totem.desktop/xine.desktop/g' /usr/share/applications/defaults.list_backup > /tmp/defaults.list
sudo mv /tmp/defaults.list /usr/share/applications/defaults.list

How to install VLC Multimedia Player with plug-in for Mozilla Firefox

sudo apt-get install vlc vlc-plugin-* mozilla-plugin-vlc
Applications -> Sound and Video -> VLC Media Player

How to install Multimedia Player (Mplayer) with plug-in for Mozilla Firefox

sudo apt-get install mozilla-mplayer
Applications -> Sound and Video -> MPlayer Movie Player

How to install Multimedia Player (Totem) with Plug-in for Mozilla Firefox

sudo apt-get install totem-gstreamer-firefox-plugin
  • Restart Mozilla Firefox

How to install Multimedia Player (XMMS)

sudo apt-get install xmms
sudo apt-get install xmms-skins
wget -c http://easylinux.info/uploads/xmms-wma_1.0.4-2_i386.deb
sudo dpkg -i xmms-wma_1.0.4-2_i386.deb
  • Associate XMMS to play MP3/M3U/WAV files
sudo cp /usr/share/applications/defaults.list /usr/share/applications/defaults.list_backup
sudo cp /usr/share/applications/defaults.list /tmp/defaults.list_tmp
sudo sed -e 's/audio\/mpeg=.*/audio\/mpeg=XMMS.desktop/g' /tmp/defaults.list_tmp > /tmp/defaults.mp3
sudo sed -e 's/audio\/x-mpegurl=.*/audio\/x-mpegurl=XMMS.desktop/g' /tmp/defaults.mp3 > /tmp/defaults.m3u
sudo sed -e 's/audio\/x-wav=.*/audio\/x-wav=XMMS.desktop/g' /tmp/defaults.m3u > /tmp/defaults.list
sudo mv /tmp/defaults.list /usr/share/applications/defaults.list
sudo rm -f /tmp/defaults.*

How to install Multimedia Player (amaroK)

sudo apt-get install amarok
  • Applications -> Sound & Video -> amaroK

How to install Multimedia Player (RealPlayer 10)

sudo apt-get install realplay
Note: 'realplay' installs RealPlayer 10 from PLF repository, which you should be enabled if you followed this guide. 'realplayer' installs RealPlayer 8 from multiverse.
  • Applications -> Sound & Video -> RealPlayer 10
  • It will also install all the necessary plugins automagically for it to view embedded real videos in Firefox
  • To avoid issues of flickering or screen going blank when switching windows, goto
  • RealPlayer 10 -> Tools -> Preferences -> Hardware -> Uncheck XVideo

How to install Stream Directory Browser (streamtuner)

sudo apt-get install streamtuner
sudo apt-get install streamripper

How to install Music Organizer (Cowbell)

sudo apt-get install cowbell
  • Applications -> Sound & Video -> Cowbell Music Organizer

Paano maginstall ng ID3 Tag Editor (EasyTAG)

sudo apt-get install easytag

Paano maginstall ng Video Editor (Kino)

sudo apt-get install kino
sudo apt-get install kinoplus
sudo apt-get install kino-timfx
sudo apt-get install kino-dvtitler

Paano maginstall ng Audio Editor (Audacity)

sudo apt-get install audacity

Paano maginstall ng DVD Ripper (dvd::rip)

sudo apt-get install dvdrip
sudo apt-get install vcdimager
sudo apt-get install cdrdao
sudo apt-get install subtitleripper
sudo ln -fs /usr/bin/rar /usr/bin/rar-2.80
sudo gedit /usr/share/applications/dvdrip.desktop
  • Insert the following lines into the new file
[Desktop Entry]
Name=dvd::rip 
Comment=dvd::rip
Exec=dvdrip
Icon=/usr/share/perl5/Video/DVDRip/icon.xpm
Terminal=false
Type=Application
Categories=Application;AudioVideo;

Paano maginstall ng CD Ripper (Goobox)

sudo apt-get install goobox
sudo rm -f /usr/share/applications/goobox.desktop
sudo gedit /usr/share/applications/goobox.desktop
  • Insert the following lines into the new file
[Desktop Entry]
Name=CD Player & Ripper
Comment=Play and extract CDs
Exec=goobox
Icon=goobox.png
Terminal=false
Type=Application
Categories=Application;AudioVideo;

How to install Image Viewer (digiKam)

sudo apt-get install digikam digikamimageplugins kipi-plugins
  • Applications -> Graphics -> digikam

How to install Picasa image organizer

sudo gedit /etc/apt/sources.list
  • Add the following lines at the end of file
# Google Picasa for Linux repository
deb http://dl.google.com/linux/deb/ stable non-free
  • Save the edited file
sudo apt-get update
sudo apt-get install picasa
  • Applications -> Graphics -> Picasa

How to install Opera web browser

sudo gedit /etc/apt/sources.list
  • Add the following lines at the end of file
# The Opera web browser repopsitory
deb http://deb.opera.com/opera etch non-free
  • Save the edited file
sudo apt-get update
sudo apt-get install opera
  • Applications -> Internet -> Opera
  • To get java working go to Tools->Preferences->Advanced->Content-> Check "Enable Java". Click the "Enable Java..." button enter "/usr/lib/jvm/java-1.5.0-sun/jre/lib/i386" (for sun java) in the new dialog and then click the "Validate Java Path" button.

Paano maginstall ng Email Client (Mozilla Thunderbird)

sudo apt-get install mozilla-thunderbird

Paano maginstall ng Newsreader (Pan)

wget -c http://www.users.on.net/~stubby/pan_0.100_i386.deb
sudo apt-get install libgmime2.1
sudo dpkg -i pan_0.100_i386.deb

How to install RSS/RDF/Atom Newsreader (RSSOwl)

wget -c http://easylinux.info/uploads/rssowl_linux_1_1_3_bin.tar.gz
sudo tar zxvf rssowl_linux_1_1_3_bin.tar.gz -C /opt/
sudo chown -R root:root /opt/rssowl_linux_1_1_3_bin/
sudo gedit /usr/bin/runRSSOwl.sh
  • Insert the following lines into the new file
export MOZILLA_FIVE_HOME=/usr/lib/mozilla-firefox
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:${MOZILLA_FIVE_HOME}:${LD_LIBRARY_PATH}
cd /opt/rssowl_linux_1_1_3_bin/
./run.sh
  • Save the edited file
sudo chmod +x /usr/bin/runRSSOwl.sh
sudo gedit /usr/share/applications/RSSOwl.desktop
  • Insert the following lines into the new file
[Desktop Entry]
Name=RSSOwl
Comment=RSSOwl
Exec=runRSSOwl.sh
Icon=/opt/rssowl_linux_1_1_3_bin/rssowl.xpm
Terminal=false
Type=Application
Categories=Application;Network;
  • Save the edited file
  • Applications -> Internet -> RSSOwl

Paano maginstall ng Web Authoring System (Nvu)

sudo apt-get install nvu
sudo rm -f /usr/share/applications/nvu.desktop
sudo gedit /usr/share/applications/nvu.desktop
  • Insert the following lines into the new file
[Desktop Entry]
Name=Nvu
Comment=Web Development Editor
Exec=nvu
Icon=nvu.xpm
Terminal=false
Type=Application
Categories=Application;Network;

How to install Web Development Environment (quanta plus)

sudo apt-get install quanta
  • Applications -> Programming -> Quanta Plus

Paano maginstall ng Project Management Application (Planner)

sudo apt-get install planner

Paano maginstall ng Accounting Application (GnuCash)

sudo apt-get install gnucash
sudo rm -fr /usr/share/gnome/apps/Applications/
sudo gedit /usr/share/applications/GnuCash.desktop
  • Insert the following lines into the new file
[Desktop Entry]
Name=GnuCash
Comment=GnuCash Personal Finance
Exec=gnucash
Icon=/usr/share/pixmaps/gnucash/gnucash-icon.png
Terminal=false
Type=Application
Categories=Application;Office;

Paano maginstall ng Desktop Publishing Application (Scribus)

sudo apt-get install scribus

Paano maginstall ng Diagram Editor (Dia)

sudo apt-get install dia-gnome

Paano maginstall ng Compiled HTML Help (CHM) Viewer (xCHM)

sudo apt-get install xchm

How to install CD/DVD Burning Application (GnomeBaker)

sudo apt-get install gnomebaker

How to install CD/DVD Burning Application (K3b)

sudo apt-get install k3b k3b-mp3
  • Applications -> Sound & Video -> K3b

How to install Dialup PPP Client (GNOME PPP)

sudo apt-get install gnome-ppp

How to install Broadband ADSL/PPPoE Client (RP-PPPoE)

wget -c http://easylinux.info/uploads/rp-pppoe-3.6.tar.gz
sudo tar zxvf rp-pppoe-3.6.tar.gz -C /opt/
sudo chown -R root:root /opt/rp-pppoe-3.6/
sudo gedit /usr/share/applications/RP-PPPoE.desktop
  • Insert the following lines into the new file
[Desktop Entry]
Name=RP-PPPoE
Comment=RP-PPPoE
Exec=gksudo /opt/rp-pppoe-3.6/go-gui
Icon=
Terminal=false
Type=Application
Categories=Application;Network;

Paano Mag-Install Ng Boot-Up Manager (BUM)

sudo apt-get install bum

How to install Partition Editor (GParted)

sudo apt-get install gparted

How to install Firewall (Firestarter)

sudo apt-get install firestarter

How to install network traffic analyzer (Ethereal)

sudo apt-get install ethereal
  • Applications -> Internet -> Ethereal

How to install Vulnerability Scanner (Nessus)

sudo apt-get install nessus
sudo apt-get install nessusd
sudo nessus-adduser
sudo ln -fs /etc/init.d/nessusd /etc/rc2.d/S20nessusd
sudo /etc/init.d/nessusd start
sudo gedit /usr/share/applications/Nessus.desktop
  • Insert the following lines into the new file
[Desktop Entry]
Name=Nessus
Comment=Nessus
Exec=nessus
Icon=/usr/share/pixmaps/nessus.xpm
Terminal=false
Type=Application
Categories=Application;System;

How to install RAR Archiver (rar)

sudo apt-get install rar
sudo ln -fs /usr/bin/rar /usr/bin/unrar
  • Applications -> Accessories -> Archive Manager

How to install Extra Fonts

sudo apt-get install xfonts-intl-arabic
sudo apt-get install xfonts-intl-asian
sudo apt-get install xfonts-intl-chinese
sudo apt-get install xfonts-intl-chinese-big
sudo apt-get install xfonts-intl-european
sudo apt-get install xfonts-intl-japanese
sudo apt-get install xfonts-intl-japanese-big
sudo apt-get install xfonts-intl-phonetic
sudo apt-get install gsfonts-x11
sudo apt-get install msttcorefonts
sudo fc-cache -f -v
Note: Ubuntu Dapper comes with the DejaVu fonts (derived from Bitstream Vera) and provides adequate support for Latin, Greek and Cyrillic based languages.

How to install Chinese Input Method (SCIM)

The following advices are outdated and it could be hard to revert to normal afterwards. Please follow instead the official Ubuntu 6.06 Dapper Drake guide HERE

Please note that scim is now installed by default in Dapper, and installing Chinese, Japanese or Korean Support is done using System>Administration>Language Support. The wiki details the method more thoroughly

sudo apt-get install scim
sudo apt-get install scim-chinese
sudo apt-get install scim-config-socket
sudo apt-get install scim-gtk2-immodule
sudo apt-get install scim-tables-zh
wget -c http://easylinux.info/uploads/fireflysung-1.3.0.tar.gz
sudo tar zxvf fireflysung-1.3.0.tar.gz -C /usr/share/fonts/truetype/
sudo chown -R root:root /usr/share/fonts/truetype/fireflysung-1.3.0/ 
sudo fc-cache -f -v
  • System -> Preferences -> SCIM Input Method Setup
  • To activate SCIM
Press 'Ctrl + Space'

How to install Desktop Applets (gDesklets)

sudo apt-get install gdesklets
sudo apt-get install gdesklets-data

How to install Basic Compilers (build-essential)

sudo apt-get install build-essential

How to install Integrated Development Environment (Anjuta)

sudo apt-get install anjuta
  • Applications -> Programming -> Anjuta IDE

How to install MonoDevelop (C# IDE)

sudo apt-get install mono mono-gmcs mono-gac mono-utils monodevelop

How to install 3D modeling tool (Blender 3d)

sudo apt-get install blender
  • Applications -> Graphics -> Blender 3D modeller

How to install game Tuxracer

sudo apt-get install planetpenguin-racer planetpenguin-racer-data planetpenguin-racer-extras
  • Applications -> Games -> planetpenguin-racer

How to install game Frozen-Bubble

sudo apt-get install frozen-bubble
  • Applications -> Games -> Frozen-Bubble

How to install game Scorched3D

sudo apt-get install scorched3d
sudo gedit /usr/share/applications/scorched3d.desktop
  • Insert the following lines into the new file
[Desktop Entry]
Name=Scorched 3D
Comment=A 3D Remake Of Scorched Earth
Exec=scorched3d
Icon=
Terminal=false
Type=Application
Categories=Application;Game;ArcadeGame;

How to install virtual planetarium (Stellarium)

sudo apt-get install stellarium
sudo gedit /usr/share/applications/stellarium.desktop
  • Insert the following lines into the new file
[Desktop Entry]
Name=Stellarium
Comment=Virtual planetarium
Exec=stellarium
Terminal=false
Type=Application
Categories=Application;Education;
  • Applications -> Education -> Stellarium

How to install Google Earth

wget -c http://dl.google.com/earth/GE4/GoogleEarthLinux.bin
sudo sh GoogleEarthLinux.bin
  • Leave /usr/local/google-earth as the installation path
  • After installation click Exit. If you instead chose to run the application, read the Note below.
sudo cp /usr/local/google-earth/googleearth.desktop /usr/share/applications/
  • Applications -> Internet -> Google Earth
  • Note: If you run Google Earth for the first time from the installer, it will require root privileges to run the next time. To fix that:
sudo chmod 777 -R ~/.googleearth

How to install KDE Edutainment applications

sudo apt-get install kdeedu
  • Applications -> Education -> ...

How to install Windows Applications in Linux (Wine)

Wine Is Not an Emulator. Wine is an Open Source implementation of the Windows API on top of X and Unix. Think of Wine as a compatibility layer for running Windows programs. Wine does not require Microsoft Windows, as it is a completely free alternative implementation of the Windows API consisting of 100% non-Microsoft code, however Wine can optionally use native Windows DLLs if they are available.

In other words, Wine will let you run Windows applications in Linux.

  • First, add repository for Wine:
sudo gedit /etc/apt/sources.list
  • Add the following lines at the end of this file
# Repository for wine
deb http://wine.budgetdedicated.com/apt dapper main
deb-src http://wine.budgetdedicated.com/apt dapper main
  • Save the edited file
sudo apt-get update
sudo apt-get install wine

How to install a Drop Down Terminal like in First Person Shooters (tilda)

Do you want a console like in a first person shooter? Tilda should take care of you.

sudo apt-get install tilda
  • The default keybinding is F1. To change the default keybinding, either enter tilda -C at the terminal, or right click on the tilda terminal then click Preferences. While in preferences, you can change other things such as transparency, font, size, and window size.

Other Desktop Environments

How to install KDE

sudo apt-get install kubuntu-desktop
Note: This installation will require ~400MB of disk space
  • System -> Log Out -> Log Out
  • To log in to KDE click on Sessions and choose KDE

How to install XFCE

sudo apt-get install xubuntu-desktop
  • System -> Log Out -> Log Out
  • To log in to XFCE click on Sessions and choose XFCE


How to install XFCE 4.4 preview versions (4.3.90.1)

  • to install Xfce 4.4 beta 1 (4.3.90.1) on a fresh install of Dapper:
sudo apt-get install build-essential gcc pkg-config libglib2.0-0 \
     libglib2.0-dev libgtk2.0-0 libgtk2.0-dev libxml++2.6c2a libxml++2.6-dev \
     libvte-dev libvte4 a2ps libxpm-dev libxpm4 alsa-source alsa alsa-base \
     alsa-oss alsa-utils libxml-parser-perl libpng12-0 libpng12-dev libdbh1.0-dev
chmod +x xfce4-4.3.90.1-installer.bin
sudo ./xfce4-4.3.90.1-installer.bin
  • finally to enable Xfce, you may need to enable it on the desktop manager (mark allow Xfce manage desktop)

Eye Candy

How to install Xgl/Compiz (Nvidia)



sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
sudo gedit /etc/X11/xorg.conf
  • Find this section
Section "Module"
	Load	"i2c"
	Load	"bitmap"
	...
	Load	"type1"
	Load	"vbe"
EndSection
  • Comment out dri and GLcore (if present)
#	Load	"dri"
#	Load	"GLcore"
  • Make sure the glx module is loaded
	Load	"glx"
  • Find this section (your values may vary)
Section "Device"
	Identifier	"NVIDIA Corporation NV34M [GeForce FX Go5200]"
	Driver		"nv"
	BusID		"PCI:1:0:0"
EndSection
  • Replace with the following lines, leaving the Identifier and BusID as it is
Section "Device"
	...
	Driver		"nvidia"
	...
	Option		"RenderAccel"		"true"
	Option		"AllowGLXWithComposite" "true"
EndSection
  • Find this section
Section "Screen"
	Identifier	"Default Screen"
	Device		"NVIDIA Corporation NV34M [GeForce FX Go5200]"
	Monitor		"Generic Monitor"
	DefaultDepth	16
  • Make sure DefaultDepth is set to 24, if it isn't already
	DefaultDepth	24
  • Save the edited file
  • Install Xgl/Compiz
sudo apt-get install compiz xserver-xgl libgl1-mesa xserver-xorg libglitz-glx1 compiz-gnome
sudo cp /etc/gdm/gdm.conf-custom /etc/gdm/gdm.conf-custom-backup
sudo gedit /etc/gdm/gdm.conf-custom
  • Replace everything with the following lines
# GDM Configuration Customization file.
#
# This file is the appropriate place for specifying your customizations to the
# GDM configuration.   If you run gdmsetup, it will automatically edit this
# file for you and will cause the daemon and any running GDM GUI programs to
# automatically update with the new configuration.  Not all configuration
# options are supported by gdmsetup, so to modify some values it may be
# necessary to modify this file directly by hand.
# 
# To hand-edit this file, simply add or modify the key=value combination in
# the appropriate section in the template below.  Refer to the comments in the
# gdm.conf file for information about each option.  Also refer to the reference
# documentation.
# 
# If you hand edit a GDM configuration file, you should run the following
# command to get the GDM daemon to notice the change.  Any running GDM GUI
# programs will also be notified to update with the new configuration.
#
# gdmflexiserver --command="UPDATE_CONFIG <configuration key>"
#
# For example, the "Enable" key in the "[debug]" section would be specified by
# "debug/Enable".
#
# You can also run gdm-restart or gdm-safe-restart to cause GDM to restart and
# re-read the new configuration settings.  You can also restart GDM by sending
# a HUP or USR1 signal to the daemon.  HUP behaves like gdm-restart and causes
# any user session started by GDM to exit immediately while USR1 behaves like
# gdm-safe-restart and will wait until all users log out before restarting GDM.
# 
# For full reference documentation see the gnome help browser under
# GNOME|System category.  You can also find the docs in HTML form on
# http://www.gnome.org/projects/gdm/
# 
# NOTE: Lines that begin with "#" are considered comments.
# 
# Have fun!

[daemon]

[security]

[xdmcp]

[gui]

[greeter]

[chooser]

[debug]

[servers]# Override display 1 to use Xgl
0=Xgl 

[server-Xgl] 
name=Xgl server 
command=/usr/bin/Xgl :0 -fullscreen -ac -accel glx:pbuffer -accel xv:fbo 
flexible=true
  • Create a script that runs Xgl/Compiz on startup
sudo gedit /usr/bin/thefuture
  • Insert the following lines into the new file. Replace .us with appropriate keyboard binding for your region. Eg .gb for United Kingdom. For a full list of keyboard bindings, type ls /usr/share/xmodmap in a terminal. If unsure, leave as .us (United States)
#!/bin/bash
gnome-window-decorator &  compiz --replace gconf decoration wobbly fade minimize cube rotate zoom scale move resize place switcher &
xmodmap /usr/share/xmodmap/xmodmap.us
  • Save the file
sudo chmod 755 /usr/bin/thefuture
  • To run compiz for this session
thefuture
  • To have compiz load on startup
    • System -> Preferences -> Sessions
    • Startup Programs -> Add
/usr/bin/thefuture
  • Troubleshooting
    • If Xgl/Compiz doesn't seem to work, or you get errors, simply restart your machine after adding "thefuture" to Startup programs
    • If moving windows slows down the system, run gconf-editor from the terminal. Find apps/compiz/general/screen0/options. Disable detect_refresh_rate and set refresh rate to 60. Everything should work fine now...
    • If you are using a non default keyboard layout (other language), you might have to change it back to what you need if the keyboard acts funny at System/Settings/Keyboard.
    • You can also set the Super-key to the windows button here.
    • If you don't want "bottom expanded panel", type "killall gnome-panel" in terminal.
  • Tips
    • Switch windows = Alt + Tab
    • Arrange and View All Windows = F12 turns on or off; clicking a window will zoom it to the front
    • Switch desktops on cube = Ctrl + Alt + Left/Right Arrow
    • Switch desktops on cube - with active window following = Ctrl + Shift + Alt + Left/Right Arrow
    • Rotate cube manually = Ctrl + Alt + left-click
    • Make window translucent/opaque = currently only possible with the "transset" utility
    • Zoom-in once = Super-key right-click
    • Zoom-in manually = Super-key + wheel mouse up
    • Zoom-out manually = Super-key + wheel mouse down
    • Move window = Alt + left-click
    • Snap Move window (will stick to borders) = Ctrl + Alt + left-click
    • Resize window = Alt + right-click

How to install Xgl/Compiz (ATI)

How to install alternate boot splash screen

  • Basahin ang #Mga Pangkalahatang Pansin
  • This installs a minimalistic splash screen that appears when the computer is booting up and shutting down. It is devoid of any text messages.
wget -c http://www.users.on.net/~stubby/usplash-minimalistic_0.1.deb
sudo dpkg -i usplash-minimalistic_0.1.deb
sudo update-alternatives --config usplash-artwork.so
  • Select the minimalistic alternative (/usr/local/lib/usplash/minimalastic.so) by entering the corresponding number. If you ever want to revert back to the original splash, select the default (/usr/lib/usplash/usplash-default.so)
  • Restart your computer to see the effects

Commercial Applications

How to install Windows 9X/ME/2000/XP (Win4Lin)

How to install Windows Applications (CrossOver Office)

How to install Windows Games (Cedega)

User Administration

How to set/change/enable root user password

sudo passwd root

How to disable root user account

sudo passwd -l root

How to allow root user to login into GNOME

Security Tab -> Security -> Allow root to login with GDM (Checked)

How to switch to root user in Console mode

sudo -s -H
Password: <specify user password>

How to add/edit/delete system users

Users Tab -> Add User.../Properties/Delete
or
sudo useradd jim
sudo userdel jim
  • For more info read
man usermod

How to add/edit/delete system groups

Groups Tab -> Add Group.../Properties/Delete

How to automatic login into GNOME (not secure)

Security Tab -> Enable Automatic Login (Checked)
Now choose a user from the drop-down menu.

How to allow more sudoers

export EDITOR=gedit && sudo visudo
  • Append the following line at the end of file
system_username	ALL=(ALL) ALL
  • Save the edited file

How to use "sudo" without prompt for password (not secure)

export EDITOR=gedit && sudo visudo
  • Find this line
...
system_username	ALL=(ALL) ALL
...
  • Replace with the following line
system_username	ALL=(ALL) NOPASSWD: ALL
  • Save the edited file

How to explicitly destroy the "sudo" session

sudo -K

How to change files/folders permissions

Right click on files/folders -> Properties
Permissions Tab -> Read/Write/Execute (Checked the permissions for Owner/Group/Others)

How to change files/folders ownership

sudo chown system_username /location_of_files_or_folders

How to change files/folders group ownership

sudo chgrp system_groupname /location_of_files_or_folders

Hardware

How to install Graphics Driver (NVIDIA)

sudo apt-get install nvidia-glx nvidia-kernel-common
sudo nvidia-glx-config enable

How to disable NVIDIA graphics logo on GNOME startup

sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
sudo gedit /etc/X11/xorg.conf
  • Find this section
...
Section "Device"
	Identifier	"NVIDIA Corporation NV11 [GeForce2 MX/MX 400]"
	Driver		"nvidia"
	BusID		"PCI:1:0:0"
...
  • Add the following line below it
   Option		"NoLogo"

How to install Graphics Driver (ATI)

How to identify Modem chipset

wget -c http://easylinux.info/uploads/scanModem.gz
gunzip -c scanModem.gz > scanModem
chmod +x scanModem
sudo cp scanModem /usr/bin/
  • To identify Modem chipset
sudo scanModem
gedit Modem/ModemData.txt

How to install Modem Driver (SmartLink)

uname -r (must be 2.6.10-5-386)
wget -c http://easylinux.info/uploads/sl-modem-modules-2.6.10-5-386_2.9.9a-1ubuntu2+2.6.10-34_i386.deb
sudo dpkg -i sl-modem-modules-*.deb
sudo apt-get install sl-modem-daemon

How to configure PalmOS Devices

sudo gedit /etc/udev/rules.d/10-custom.rules
  • Insert the following line into the new file
BUS="usb", SYSFS{product}="Palm Handheld*", KERNEL="ttyUSB*", NAME{ignore_remove}="pilot", MODE="666"
  • Save the edited file
  • Add the pilot-applet to the Taskbar by Right-Clicking on an empty spot
  • Follow the instructions on screen

How to list partition tables

sudo fdisk -l
  • You can also use System -> Administration -> Disks

How to list filesystem disk space usage

df -T -h
  • You can also use System -> Administration -> Disks

How to list mounted devices

mount

How to list PCI devices

lspci

How to list USB devices

lsusb

How to speed up CD/DVD-ROM

e.g. Assumed that /dev/cdrom is the location of CD/DVD-ROM
sudo hdparm -d1 /dev/cdrom
sudo cp /etc/hdparm.conf /etc/hdparm.conf_backup
sudo gedit /etc/hdparm.conf
  • Append the following lines at the end of file
/dev/cdrom {
    dma = on
}
  • Save the edited file

How to mount/unmount CD/DVD-ROM manually, and show all hidden and associated files/folders

e.g. Assumed that /media/cdrom0/ is the location of CD/DVD-ROM
  • To mount CD/DVD-ROM
sudo mount /media/cdrom0/ -o unhide
  • To unmount CD/DVD-ROM
sudo umount /media/cdrom0/

How to forcefully unmount CD/DVD-ROM manually

e.g. Assumed that /media/cdrom0/ is the location of CD/DVD-ROM
sudo umount /media/cdrom0/ -l

How to remount /etc/fstab without rebooting

sudo mount -a


How to install a Wacom tablet

For a detailed guide with screenshots about how to configure the "Extended input devices" in your graphic applications, please follow the official Dapper guide at https://wiki.ubuntu.com//Wacom

With the version of the Linux Wacom driver (0.7.2) in Ubuntu 6.06 Dapper Drake, if you unplug you tablet, it won't function when you plug it back in and you will have to restart X. For this reason, it is best to leave the tablet plugged in. This limitation will be removed when the 0.7.4 version of the driver is included in Ubuntu.

  • 1. Using Synaptic package manager1, check if the packages xserver-xorg-input-wacom and wacom-tools are already installed - if not, install them. If you prefer using the command line, you can also execute :
     sudo apt-get install xserver-xorg-input-wacom wacom-tools
  • 2. Save a copy of your /etc/X11/xorg.conf :
      sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.backup
  • then edit it with the command line :
      sudo gedit /etc/X11/xorg.conf
  • and change all /dev/wacom occurences into /dev/input/wacom (created by wacom-tools udev scripts), then save the file.
  • You should be ready to go after you have restarted X. Remember to configure the "Extended input devices" in your graphic applications (Gimp, Inkscape), however you can already check if it's working by moving your stylus on the tablet : the mouse cursor should go through the whole screen.

CD/DVD Burning

How to blank CD-RW/DVD-RW

e.g. Assumed that /dev/cdrom is the location of CD/DVD-ROM
sudo umount /dev/cdrom
cdrecord dev=/dev/cdrom blank=fast

How to burn files/folders into CD/DVD

nautilus burn:///
  • File Browser: CD/DVD Creator
  • Drag files/folders into window
File Menu -> Write to Disc... -> Write

How to burn Image (ISO) files into CD/DVD

Right click on Image (ISO) file -> Write to Disc... -> Write

How to duplicate CD/DVD

How to create Image (ISO) files from CD/DVD

e.g. Assumed that /dev/cdrom is the location of CD/DVD-ROM
sudo umount /dev/cdrom
dd if=/dev/cdrom of=file.iso bs=1024

How to create Image (ISO) files from folders

mkisofs -o file.iso /location_of_folder/

How to generate MD5 checksum files

md5sum file.iso > file.iso.md5

How to check MD5 checksum of files

e.g. Assumed that file.iso and file.iso.md5 are in the same folder
md5sum -c file.iso.md5

How to mount/unmount Image (ISO) files without burning

sudo mkdir /media/iso
sudo modprobe loop
sudo mount file.iso /media/iso/ -t iso9660 -o loop
  • To unmount Image (ISO) file
sudo umount /media/iso/

How to set/change the burn speed for CD/DVD Burner

/ -> apps -> nautilus-cd-burner -> default_speed (set/change the burn speed)

How to enable burnproof for CD/DVD Burner

/ -> apps -> nautilus-cd-burner -> burnproof (Checked)

How to enable overburn for CD/DVD Burner

/ -> apps -> nautilus-cd-burner -> overburn (Checked)

How to burn Audio CD from MP3 (GnomeBaker)

sudo apt-get install gstreamer0.10-plugins-ugly
sudo apt-get install gstreamer0.8-misc
sudo apt-get install gstreamer0.8-mad
  • Applications -> Sound & Video -> GnomeBaker

Networking

How to configure Google Talk

How to activate/deactivate network connections

Connections Tab -> Select "Ethernet connection" -> Activate/Deactivate

How to configure network connections

Connections Tab -> Select "Ethernet connection" -> Properties
Connection -> Enable this connection (Checked)
Connection Settings -> Configuration: Select "DHCP/Static IP address"
DNS Tab -> DNS Servers -> Add/Delete

How to configure dialup connections

sudo pppconfig
  • To connect dialup
sudo pon provider_name
  • To disconnect dialup
sudo poff

How to configure broadband connections

sudo pppoeconf

How to change computer name

General Tab -> Host Settings -> Hostname: Specify the computer name 
  • Save and close all opened applications, Reboot computer

How to change computer descriptions

sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
  • Find this line
...
  server string = %h server (Samba, Ubuntu)
...
  • Replace with the following line
  server string = new_computer_descriptions
  • Save the edited file
sudo testparm
sudo /etc/init.d/samba restart

How to change computer Domain/Workgroup

sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
  • Find this line
...
  workgroup = MSHOME
...
  • Replace with the following line
  workgroup = new_domain_or_workgroup
  • Save the edited file
sudo testparm
sudo /etc/init.d/samba restart

How to assign Hostname to local machine with dynamic IP using free DynDNS service

sudo apt-get install ipcheck
sudo gedit /etc/ppp/ip-up.d/dyndns_update.sh
  • Insert the following lines into the new file
 #!/bin/sh

 USERNAME=myusername
 PASSWORD=mypassword
 HOSTNAME=myhostname.dyndns.org

 cd /root/
 if [ -f /root/ipcheck.dat ]; then
  ipcheck -r checkip.dyndns.org:8245 $USERNAME $PASSWORD $HOSTNAME
 else
  ipcheck --makedat -r checkip.dyndns.org:8245 $USERNAME $PASSWORD $HOSTNAME
 fi
  • Save the edited file
sudo chmod 700 /etc/ppp/ip-up.d/dyndns_update.sh
sudo sh /etc/ppp/ip-up.d/dyndns_update.sh

How to share folders the easy way

Right click on folder -> Share folder
Shared folder -> Share with: Select "SMB"
Share properties -> Name: Specify the share name

How to browse network computers

e.g. Assumed that network connections have been configured properly
If computers or network folders could not be found, try access them directly
Read #How to access network folders without mounting
  • Places -> Network Servers

How to access network folders without mounting

e.g. Assumed that network connections have been configured properly
Network computer's IP: 192.168.0.1
Shared folder's name: linux
  • Press 'Alt+F2' (Run Application...) and enter:
smb://192.168.0.1/linux

How to mount/unmount network folders manually, and allow all users to read

e.g. Assumed that network connections have been configured properly
Network computer's IP: 192.168.0.1
Network computer's Username: myusername
Network computer's Password: mypassword
Shared folder's name: linux
Local mount folder: /media/sharename
  • To mount network folder
sudo mkdir /media/sharename
sudo mount //192.168.0.1/linux /media/sharename/ -o username=myusername,password=mypassword
  • To unmount network folder
sudo umount /media/sharename/

How to mount/unmount network folders manually, and allow all users to read/write

e.g. Assumed that network connections have been configured properly
Network computer's IP: 192.168.0.1
Network computer's Username: myusername
Network computer's Password: mypassword
Shared folder's name: linux
Local mount folder: /media/sharename
  • To mount network folder
sudo mkdir /media/sharename
sudo mount //192.168.0.1/linux /media/sharename/ -o username=myusername,password=mypassword,dmask=777,fmask=777
  • To unmount network folder
sudo umount /media/sharename/

How to mount network folders on boot-up, and allow all users to read

e.g. Assumed that network connections have been configured properly
Network computer's IP: 192.168.0.1
Network computer's Username: myusername
Network computer's Password: mypassword
Shared folder's name: linux
Local mount folder: /media/sharename
sudo mkdir /media/sharename
sudo gedit /root/.smbcredentials
  • Insert the following lines into the new file
username=myusername
password=mypassword 
  • Save the edited file
sudo chmod 700 /root/.smbcredentials
sudo cp /etc/fstab /etc/fstab_backup
sudo gedit /etc/fstab
  • Append the following line at the end of file
//192.168.0.1/linux    /media/sharename smbfs  credentials=/root/.smbcredentials    0    0

How to mount network folders on boot-up, and allow all users to read/write

e.g. Assumed that network connections have been configured properly
Network computer's IP: 192.168.0.1
Network computer's Username: myusername
Network computer's Password: mypassword
Shared folder's name: linux
Local mount folder: /media/sharename
sudo mkdir /media/sharename
sudo gedit /root/.smbcredentials
  • Insert the following lines into the new file
username=myusername
password=mypassword
  • Save the edited file
sudo chmod 700 /root/.smbcredentials
sudo cp /etc/fstab /etc/fstab_backup
sudo gedit /etc/fstab
  • Append the following line at the end of file
//192.168.0.1/linux    /media/sharename smbfs  credentials=/root/.smbcredentials,dmask=777,fmask=777  0    0

How to get ipw2200 and wpa to work

How to Configure and start PPTP tunnels (VPN)

OR
  • Install manually
wget -c http://linux.edu.lv/uploads/content/pptp.tar.gz
tar zxvf pptp.tar.gz
sudo sh ./pptp/install
  • To configure PPTP Client
sudo gedit /usr/share/applications/pptpconfig.desktop
  • Replace content of this file with the following lines
[Desktop Entry]
Name=PPTP Client
Comment=Configure and start PPTP tunnels (VPN)
Categories=Application;Network
Encoding=UTF-8
Exec=gksudo pptpconfig
Icon=gnome-remote-desktop.png
StartupNotify=true
Terminal=false
Type=Application
  • The above lines change the default file in three ways: the application is placed in the Application/Internet category, gksudo will make the application run as superuser and we put a nice icon that appears in the menu.
  • Start the client with Applications -> Internet -> PPTP Client

How to Configure Ubuntu/Kubuntu with WPA using Network-Manager

Ubuntu Dapper in typical cases can configure WPA to work out of the box with minimal hassle. You'll need to install network-manager.


For Ubuntu:

sudo apt-get install network-manager-gnome

For Kubuntu (will install knetworkmanager):

sudo apt-get install network-mananger-kde

Logout/Reboot.

Ubuntu users should now see the NetworkManager Applet in the Gnome notification area. Kubuntu users will probably have to run knetworkmanager before they see NetworkManager in the systray.

Once Network-Manager is installed, click on the NM icon in the notification area (default is at the top right of Ubuntu/Gnome). Choose your network, then enter your passphrase. Type a password for the keyring, and you're set.

If you don't see your network, click "Create New Wireless Network...", type your essid/networkname, then choose "WPA Personal" for wireless security.

  • Note: If you installed Kubuntu then installed ubuntu-desktop & network-manager-gnome, you may not be able to use network-manager in Gnome, if at all. In this case, you may have to use WPA Supplicant and do some manual editing of conf files to get WPA up and running.
  • Note: When you first log into Gnome/KDE, the keyring application will ask for a password. Future revisions of Network-Manager should resolve this.

Remote Desktop

How to configure remote desktop (not secure)

Warning! Remote Desktop will only work if there's a GNOME login session
Leaving computer with an unattended GNOME login session is not secure
Use (System -> Lock Screen) and switch off the monitor when computer is left unattended
  • System -> Preferences -> Remote Desktop
  • Remote Desktop Preferences
Sharing ->
Allow other users to view your desktop (Checked)
Allow other users to control your desktop (Checked)
Security ->
Ask you for confirmation (Un-Checked)
Require the user to enter this password: (Checked)
Password: Specify the password

How to connect into remote Ubuntu desktop

e.g. Assumed that remote Ubuntu machine have configured Remote Desktop
Read #How to configure remote desktop (not secure)
Remote Ubuntu machine: 192.168.0.1
vncviewer -fullscreen 192.168.0.1:0
  • To quit vncviewer
Press 'F8' -> Quit viewer

How to connect into remote Ubuntu desktop via Windows machine

e.g. Assumed that remote Ubuntu machine have configured Remote Desktop
Read #How to configure remote desktop (not secure)
Remote Ubuntu machine: 192.168.0.1
  • If you have a router remember to open the appropiate port the default one is 5900
This process is called port forwarding port forwarding
  • Download DotNetVNC: Here
this is a free DotNet version that require the DotNet framework available from microsoft here
Remember tha this is only one VNC client i've found searching in internet, search the one is more suitable for your interest
  • Open the VNC cliend you have chosen, and insert the connection string formatted like this <LINUX BOX IP><:DESKTOP NUMBER>|<::PORT>
In example use: 192.168.1.2:0 or 192.168.1.2::5900 to connect to desktop 0, to connect to desktop 1 use 192.168.1.2:1 or 192.168.1.2::5901 and so on

Windows

How to mount/unmount Windows partitions (NTFS) manually, and allow all users to read only


e.g. Assumed that /dev/hda1 is the location of Windows partition (NTFS)
Local mount folder: /media/windows
  • To mount Windows partition
sudo mkdir /media/windows
sudo mount /dev/hda1 /media/windows/ -t ntfs -o nls=utf8,umask=0222
  • To unmount Windows partition
sudo umount /media/windows/

How to mount/unmount Windows partitions (FAT) manually, and allow all users to read/write

e.g. Assumed that /dev/hda1 is the location of Windows partition (FAT)
Local mount folder: /media/windows
  • To mount Windows partition
sudo mkdir /media/windows
sudo mount /dev/hda1 /media/windows/ -t vfat -o iocharset=utf8,umask=000
  • To unmount Windows partition
sudo umount /media/windows/

How to mount Windows partitions (NTFS) on boot-up, and allow all users to read only

e.g. Assumed that /dev/hda1 is the location of Windows partition (NTFS)
Local mount folder: /media/windows
sudo mkdir /media/windows
sudo cp /etc/fstab /etc/fstab_backup
sudo gedit /etc/fstab
  • Append the following line at the end of file
/dev/hda1    /media/windows ntfs  nls=utf8,umask=0222 0    0

How to mount Windows partitions (FAT) on boot-up, and allow all users to read/write

e.g. Assumed that /dev/hda1 is the location of Windows partition (FAT)
Local mount folder: /media/windows
sudo mkdir /media/windows
sudo cp /etc/fstab /etc/fstab_backup
sudo gedit /etc/fstab
  • Append the following line at the end of file
/dev/hda1    /media/windows vfat  iocharset=utf8,umask=000  0    0

How to mount Windows partitions (NTFS) on boot-up, and allow users read and write access

Warning: Ntfs writing support is still experimental. You should not enable it on production machines and/or volumes you don't have backups of. Proceed at your own risk!

sudo apt-get install libfuse2 fuse-utils
  • Download the latest ntfsprogs package (these are from the Dapper repositories, so they are safe to install.)

libntfs8 ntfsprogs libfuse2 fuse-utils

  • Install the downloaded packages
sudo dpkg -i libfuse2_*.deb fuse-utils_*.deb ntfsprogs_*.deb libntfs8_*.deb
  • Add fuse to the list of modules to load
echo fuse | sudo tee -a /etc/modules
  • Create a user group to access the ntfs disks
sudo addgroup ntfs
  • The output should look something like this, remember the GID (the number printed after the group name) as it may differ and we will need it later:
Adding group `ntfs' (1002)...
Done.
  • Create the local mount folder folder and edit the fstab file to mount the disks to this folder.
e.g. Assumed that /dev/hda1 is the location of Windows partition (NTFS)
Local mount folder: /media/windows
sudo mkdir /media/windows
sudo cp /etc/fstab /etc/fstab.bak
sudo gedit /etc/fstab
  • Append the following line at the end of file, using the GID number previously. The umask following this GID allows write access just to owner (root) and group (ntfs), and read access to everyone.
/dev/hda1    /media/windows    ntfs-fuse    auto,gid=1002,umask=0002    0    0
  • Save the edited file.
  • Add users to the ntfs group, where "username" is the name of the user you would like to have write access
sudo adduser username ntfs
sudo rm /sbin/mount.ntfs-fuse && sudo ln /usr/bin/ntfsmount /sbin/mount.ntfs-fuse
  • If you reboot now, the disk will be writable to the selected users when they logon. If you want the changes to take effect immediately without rebooting, execute the following command, ignoring the errors about "/" and others not being unmounted. You'll have to logout from all your user sessions for the new group to be acknowledged (usually a logout from your graphical session and login back again will do it).
sudo modprobe fuse && sudo umount -a && sudo mount -a

Security

What are the basic things I need to know about securing my Ubuntu

  • Basahin ang #Mga Pangkalahatang Pansin
  • Ensure hard drive is first in BIOS boot-up sequence
    • To prevent trespassers from using Linux Installation CD which allows them to gain root user access
    • To prevent trespassers from using Linux Live CD (e.g. UBUNTU/KNOPPIX/MEPIS) which allows them to destroy/browse/share the entire hard drive
    • To prevent trespassers from installing another Operating System
  • Ensure a password is set for BIOS
    • To prevent trespassers from changing the BIOS boot-up sequence
  • Ensure computer is located at a secured place
    • To prevent trespassers from removing computer's hard drive which allows them to destroy/browse/share the entire hard drive from a different computer
    • To prevent trespassers from removing computer's on-board battery which resets the BIOS password
  • Ensure passwords used on the system cannot be easily guessed
    • To prevent trespassers from cracking password file using brute force attacks (e.g. John the Ripper)
    • Create password with minimum length of 8 characters
    • Create password with mixture of characters/numbers, and upper/lower case
  • Ensure interactive editing control for GRUB menu is disabled
  • Ensure history listing is disabled in Console mode
  • Ensure Ctrl+Alt+Del is disabled in Console mode
  • Ensure interactive option is set for remove, copy and move of files/folders in Console mode
  • For day to day usage, login as a normal user
  • Disable root user account, use "sudo" instead
    • To reduce the amount of time spent with root privileges, and thus the risk of inadvertently executing a command as root
    • "sudo" provides a more useful audit trail (/var/log/auth.log)
    • Read #How to disable root user account
  • Install a Firewall
  • Perform vulnerability test

How to disable all interactive editing control for GRUB menu

grub
grub> md5crypt
Password: ****** (ubuntu)
Encrypted: $1$ZWnke0$1fzDBVjUcT1Mpdd4u/T961 (encrypted password)
grub> quit
sudo cp /boot/grub/menu.lst /boot/grub/menu.lst_backup
sudo gedit /boot/grub/menu.lst
  • Find this section
...
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
#   password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
...
  • Add the following line below it
password --md5 $1$ZWnke0$1fzDBVjUcT1Mpdd4u/T961 (encrypted password above)
  • Find this section
...
title		Ubuntu, kernel 2.6.10-5-386 (recovery mode)
root		(hd0,1)
kernel		/boot/vmlinuz-2.6.10-5-386 root=/dev/hda2 ro single
initrd		/boot/initrd.img-2.6.10-5-386
savedefault
boot
...
  • Replace with the following lines
#title		Ubuntu, kernel 2.6.10-5-386 (recovery mode)
#root		(hd0,1)
#kernel		/boot/vmlinuz-2.6.10-5-386 root=/dev/hda2 ro single
#initrd		/boot/initrd.img-2.6.10-5-386
#savedefault
#boot
  • Save the edited file

How to disable history listing in Console mode

rm -f $HOME/.bash_history
touch $HOME/.bash_history
chmod 000 $HOME/.bash_history

How to disable Ctrl+Alt+Del from restarting computer in Console mode

sudo cp /etc/inittab /etc/inittab_backup
sudo gedit /etc/inittab
  • Find this line
...
ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
...
  • Replace with the following line
#ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
  • Save the edited file
sudo telinit q

How to enable prompt before removal/overwritten of files/folders in Console mode

sudo cp /etc/bash.bashrc /etc/bash.bashrc_backup
sudo gedit /etc/bash.bashrc
  • Append the following lines at the end of file
alias rm='rm -i'
alias cp='cp -i'
alias mv='mv -i'
  • Save the edited file


Rescue Mode

How to gain root user access without login

  • Basahin ang #Mga Pangkalahatang Pansin
  • Easiest method (will not work if GRUB menu password is set)
    • Boot-up computer
    • If GRUB menu is hidden, press 'Esc' to enter the GRUB menu
    • Select
Ubuntu, kernel 2.6.10-5-386 (recovery mode)

How to modify kernel boot-up arguments, to gain root user access

  • Basahin ang #Mga Pangkalahatang Pansin
  • Boot-up computer
  • If GRUB menu is hidden, press 'Esc' to enter the GRUB menu
  • If GRUB password is set, press 'p' to unlock the GRUB menu
  • Select
Ubuntu, kernel 2.6.10-5-386
  • Press 'e' to edit the commands before booting
  • Select
kernel /boot/vmlinuz-2.6.10-5-386 root=/dev/hda2 ro quiet splash
  • Press 'e' to edit the selected command in the boot sequence
  • Add "rw init=/bin/bash" to the end of the arguments
grub edit> kernel /boot/vmlinuz-2.6.10-5-386 root=/dev/hda2 ro quiet splash rw init=/bin/bash
  • Press 'b' to boot

How to use Ubuntu Installation CD, to gain root user access

  • Basahin ang #Mga Pangkalahatang Pansin
  • Boot-up computer into Ubuntu Installation CD
  • At "boot:" prompt, add "rescue" to the argument
boot: rescue
  • Follow the instructions on screen

How to change root user/main user password if forgotten

# passwd root
  • To change main user password
# passwd system_main_username

How to change GRUB menu password if forgotten

grub
grub> md5crypt
Password: ****** (ubuntu)
Encrypted: $1$ZWnke0$1fzDBVjUcT1Mpdd4u/T961 (encrypted password)
grub> quit
sudo cp /boot/grub/menu.lst /boot/grub/menu.lst_backup
sudo gedit /boot/grub/menu.lst
  • Find this line
...
password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
...
  • Replace with the following line
password --md5 $1$ZWnke0$1fzDBVjUcT1Mpdd4u/T961 (encrypted password above)
  • Save the edited file

How to restore GRUB menu after Windows installation

e.g. Assumed that /dev/hda is the location of /boot partition
# grub-install /dev/hda

How to add Windows entry into GRUB menu

e.g. Assumed that /dev/hda1 is the location of Windows partition
sudo cp /boot/grub/menu.lst /boot/grub/menu.lst_backup
sudo gedit /boot/grub/menu.lst
  • Append the following lines at the end of file
title		Microsoft Windows
root		(hd0,0)
savedefault
makeactive
chainloader	+1
  • Save the edited file

How to read Linux partitions (ext2, ext3) in Windows machine

OR

Tips & Tricks

How to restart GNOME without rebooting computer

Press 'Ctrl + Alt + Backspace'

or
sudo /etc/init.d/gdm restart

How to turn on Num Lock on GNOME startup

sudo apt-get install numlockx
sudo cp /etc/X11/gdm/Init/Default /etc/X11/gdm/Init/Default_backup
sudo gedit /etc/X11/gdm/Init/Default
  • Find this line
...
exit 0
  • Add the following lines above it
if [ -x /usr/bin/numlockx ]; then
 /usr/bin/numlockx on
fi

How to run programs on startup when login into GNOME

Startup Programs Tab -> Add/Edit/Delete

How to speed-up your Ubuntu box

How to switch to Console mode in GNOME

Press 'Ctrl + Alt + F1' (F2 - F6)
  • To switch between consles in Console mode
Press 'Alt + F1' (F2 - F6)
  • To switch back to GNOME mode
Press 'Alt + F7'

How to disable Ctrl+Alt+Backspace from restarting X in GNOME

sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
sudo gedit /etc/X11/xorg.conf
  • Append the following lines at the end of file
Section "ServerFlags"
	Option		"DontZap"		"yes"
EndSection

How to enable Ctrl+Alt+Del to open System Monitor in GNOME

gconftool-2 -t str --set /apps/metacity/global_keybindings/run_command_9 "<Control><Alt>Delete"
gconftool-2 -t str --set /apps/metacity/keybinding_commands/command_9 "gnome-system-monitor"

How to refresh GNOME desktop

killall nautilus

Paano i-refresh ang GNOME panel

killall gnome-panel

How to enable autosave in Gedit and disable creation of some_file~ files

/ -> apps -> gedit-2 -> preferences -> editor -> save -> create_backup_copy (Unchecked)
/ -> apps -> gedit-2 -> preferences -> editor -> save -> auto_save (Checked)

How to show all hidden files/folders in Nautilus

Press 'Ctrl + H'
  • To permanently show all hidden files/folders in Nautilus
Edit Menu -> Preferences
Views Tab -> Default View -> Show hidden and backup files (Checked)

How to browse files/folders as root user in Nautilus

sudo gedit /usr/share/applications/Nautilus-root.desktop
    • Insert the following lines into the new file
[Desktop Entry]
Name=File Browser (Root)
Comment=Browse the filesystem with the file manager
Exec=gksudo "nautilus --browser %U"
Icon=file-manager
Terminal=false
Type=Application
Categories=Application;System;
  • To browse files/folders as root user in Nautilus
    • Applications -> System Tools -> File Browser (Root)

How to change default file type "Open with" program

Right click on file -> Properties
Open With Tab -> Add
Select "Open with" program
Select "Open with" program (Checked)

How to change preferred email client to Mozilla Thunderbird

Mail Reader Tab -> Default Mail Reader -> Command: mozilla-thunderbird %s

How to open files as root user via right click

gedit $HOME/.gnome2/nautilus-scripts/Open\ as\ root
  • Insert the following lines into the new file
for uri in $NAUTILUS_SCRIPT_SELECTED_URIS; do
	gksudo "gnome-open $uri" &
done
  • Save the edited file
chmod +x $HOME/.gnome2/nautilus-scripts/Open\ as\ root

Right click on file -> Scripts -> Open as root

How to disable beep sound in Terminal mode

Not for Dapper---- firingstone

Edit Menu -> Current Profile...
General Tab -> General -> Terminal bell (Un-Checked)

How to handle mss protocol in Mozilla Firefox


  • Open your firefox.
  • Type as url: about:config

Now just right click somewhere into the main window. A little box with options to choose will appear. Choose "new", then "string". Then copy the following line into the appearing text field:

network.protocol-handler.app.mms

Into the next text field copy this:

/usr/bin/X11/vlc

Now you do the same thing again, but this time you do not choose "string" but "boolean", and the line to copy is:

network.protocol-handler.external.mms

Then set

true

How to handle rtsp (realmedia) protocol in Mozilla Firefox


  • Open your firefox.
  • Type as url: about:config

Now just right click somewhere into the main window. A little box with options to choose will appear. Choose "new", then "string". Then copy the following line into the appearing text field:

network.protocol-handler.app.rtsp

Into the next text field copy this:

/usr/bin/X11/realplay

Now you do the same thing again, but this time you do not choose "string" but "boolean", and the line to copy is:

network.protocol-handler.external.rtsp

Then set

true

How to load Web site faster in Mozilla Firefox

Address Bar -> about:config
Filter: ->
network.dns.disableIPv6 -> true
network.http.pipelining -> true
network.http.pipelining.maxrequests -> 8
network.http.proxy.pipelining -> true
  • Restart Mozilla Firefox

How to disable beep sound for link find function in Mozilla Firefox

Address Bar -> about:config
Filter: -> accessibility.typeaheadfind.enablesound -> false
  • Restart Mozilla Firefox


How to apt-get the easy way (Synaptic)

  • Basahin ang #Mga Pangkalahatang Pansin
  • System -> Administration -> Synaptic Package Manager
  • To enable the extra Universe and Multiverse repositories
    1. Settings -> Repositories
    2. In the Installation Media tab, click Add. There are three separate repositories; Dapper Drake, Security Updates and Updates. Select each repository and check Officially supported, Restricted copyright, Community maintained (Universe) and Non-free (Multiverse). Ensure you click OK between each repository to save your changes
    3. You should now see those three repositories under Channels. Make sure Officially supported, Restricted copyright, Community maintained (Universe) and Non-free (Multiverse) appears under each repository
  • To add backports and PLF (new versions of many applications. Unsupported. May contain illegal packages. Use at own risk.)
    1. Settings -> Repositories
    2. Click on Add and then Custom
    3. Paste the following four lines into the box and click Add Repository, one line at a time:
deb http://archive.ubuntu.com/ubuntu dapper-backports main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu dapper-backports main restricted universe multiverse
deb http://packages.freecontrib.org/ubuntu/plf dapper free non-free
deb-src http://packages.freecontrib.org/ubuntu/plf dapper free non-free 
deb http://archive.canonical.com/ubuntu dapper-commercial main
  • To refresh the list of known packages (equivalent to apt-get update)
Edit Menu -> Reload Package Information
  • To install all possible upgrades (equivalent to apt-get upgrade)
Edit Menu -> Mark All Upgrades... -> Default Upgrade
Edit Menu -> Apply Marked Changes
  • To search for a package (equivalent to apt-cache search package_name)
Edit Menu -> Search... Specify the package name
  • To install the selected package (equivalent to apt-get install package_name)
Select "package_name"
Package Menu -> Mark for Installation
Edit Menu -> Apply Marked Changes
  • To remove installed package (equivalent to apt-get remove package_name)
Select "package_name"
Package Menu -> Mark for Removal
Edit Menu -> Apply Marked Changes

What packages do the extra repositories provide

  • The PLF repository provides
    1. DVD playback support (libdvdcss2)
    2. Skype
    3. Sun Java SDK (Software Development Kit) and JRE (Java Runtime Environment)
    4. Opera Web browser
    5. RealPlayer 10
    6. Win32 binary multimedia codecs

How to install/uninstall .deb files

sudo dpkg -i package_file.deb
  • To uninstall .deb file
sudo dpkg -r package_name

How to convert .rpm files to .deb files

sudo alien package_file.rpm

How to rename all files in directory at once

wget -c http://easylinux.info/uploads/mvb_1.6.tgz
sudo tar zxvf mvb_1.6.tgz -C /usr/share/
sudo chown -R root:root /usr/share/mvb_1.6/
sudo ln -fs /usr/share/mvb_1.6/mvb /usr/bin/mvb

  • To rename all files in directory at once
mvb NEW_NAME

How to manipulate all image files in directory at once

sudo apt-get install imagemagick
wget -c http://easylinux.info/uploads/bbips.0.3.2.sh
sudo cp bbips.0.3.2.sh /usr/bin/bbips
sudo chmod 755 /usr/bin/bbips
  • To manipulate all image files in directory at once
bbips

How to set System-wide Environment Variables

sudo cp -p /etc/profile /etc/profile_backup
sudo gedit /etc/profile
  • Append the System-wide Environment Variables at the end of file
  • Save the edited file

How to save "man" outputs into files

man command | col -b > file.txt

How to hide GRUB menu on boot-up

sudo cp /boot/grub/menu.lst /boot/grub/menu.lst_backup
sudo gedit /boot/grub/menu.lst

  • Find this line
...
#hiddenmenu
...
  • Replace with the following line
hiddenmenu
  • Save the edited file

How to change the timeout seconds for GRUB menu on boot-up

sudo cp /boot/grub/menu.lst /boot/grub/menu.lst_backup
sudo gedit /boot/grub/menu.lst
  • Find this line
...
timeout     3
...
  • Replace with the following line
timeout     X_seconds
  • Save the edited file

How to change default Operating System boot-up for GRUB menu

sudo cp /boot/grub/menu.lst /boot/grub/menu.lst_backup
sudo gedit /boot/grub/menu.lst
  • Find this line
...
default     0
...
  • Replace with the following line
default     X_sequence
  • Save the edited file

How to display Splash Image for GRUB menu on boot-up

e.g. Assumed that hd0,1 is the location of Ubuntu boot partition
wget -c http://easylinux.info/uploads/ubuntu.xpm.gz
chmod 644 ubuntu.xpm.gz
sudo mkdir /boot/grub/images
sudo cp ubuntu.xpm.gz /boot/grub/images/
sudo cp /boot/grub/menu.lst /boot/grub/menu.lst_backup
sudo gedit /boot/grub/menu.lst
  • Find this section
# menu.lst - See: grub(8), info grub, update-grub(8)
#      grub-install(8), grub-floppy(8),
#      grub-md5-crypt, /usr/share/doc/grub
#      and /usr/share/doc/grub-doc/.
...
  • Add the following line below it
splashimage (hd0,1)/boot/grub/images/ubuntu.xpm.gz
  • Save the edited file

How to convert Wallpaper to Splash Image for GRUB menu

e.g. Assumed that wallpaper.png is the Wallpaper to be converted to Splash Image
splashimage.xpm.gz is the Splash Image for GRUB menu
convert -resize 640x480 -colors 14 wallpaper.png splashimage.xpm && gzip splashimage.xpm

How to display only one kernel on GRUB menu

sudo cp /boot/grub/menu.lst /boot/grub/menu.lst_backup-`date +%F`
sudo gedit /boot/grub/menu.lst
  • Find this line
...
# howmany=all
...
  • Replace with the following line
# howmany=1

Where 1 means to keep the last kernel, 2 to keep the last 2 kernels, etc. Do not delete the # symbol. The menu will be updated once a new kernel will be updated by the system, not before.

  • Save the edited file

How to temporary skip boot-up services

Press 'Ctrl + C'

How to permanently disable/enable boot-up services

How to clean /tmp/ folder contents on shutdown

sudo cp /etc/init.d/sysklogd /etc/init.d/sysklogd_backup
sudo gedit /etc/init.d/sysklogd
  • Find this section
...
 stop)
  log_begin_msg "Stopping system log daemon..."
  start-stop-daemon --stop --quiet --oknodo --exec $binpath --pidfile $pidfile
  log_end_msg $?
...
  • Add the following line below it
  rm -fr /tmp/* /tmp/.??*
  • Save the edited file

How to scroll up and down to view previous outputs in Console mode

Press 'Shift + Page Up'
  • To scroll down to view previously outputs
Press 'Shift + Page Down'

How to find out which version of Ubuntu I am using

cat /etc/issue

How to set up automatic background change (GNOME)

mkdir ~/.backgrounds
cd ~/.backgrounds
wget -c http://easylinux.info/uploads/change_background.py
chmod +x change_background.py
  • To change desktop background every time you reboot your computer
export EDITOR=gedit && crontab -e
  • Add the following line at the end of file
@reboot ~/.backgrounds/change_background.py
For more information about periodic processes see
man 5 crontab

How to set up automatic background change (KDE)

  • Go to K-menu -> System Settings -> Desktop -> Background
  • Choose Slide Show
  • Press Setup...
  • Press Add... to add pictures you wish to see as desktop background
  • Set 'Change picture after' to desired picture rotation interval.
  • Press 'OK'

How to add keyboard layouts for other languages

  • Go to System -> Preferences -> Keyboard
  • Choose Layouts
  • Press Add... to add the secondary keyboard layout. It is simpler to have two layouts; the maximum is currently four for Xorg.
  • Choose Layout Options
  • Expand option Group Shift/Lock behaviour
  • Choose the key combination that enables you to switch between keyboard layouts. The default is by pressing both Alt keys at the same time. A common alternative is to use Alt+Shift.
  • Press Close.

See #How to add the Keyboard (Layout) Indicator applet to add the Keyboard Indicator applet.

How to add keyboard layouts toggle for other languages (Xfce)

  • use *.lst files on /etc/X11/xkb/rules to select 2nd_laguage_code
setxkbmap -option grp:switch,grp:alt_shift,grp_led:scroll us,2nd_laguage_code
  • you can add it to a startup file, which will be set to be executed on startup, with the following lines (remember to 'chmod +x' the file):
#!/bin/tcsh
setxkbmap -option grp:switch,grp:alt_shift,grp_led:scroll us,il

How to add the Keyboard (Layout) Indicator applet

  • Right-click on empty space on the top panel so that you see the pop-up menu.
  • Click Add to Panel...
  • Choose Keyboard Indicator (it is under the Utilities section, at the end)

The Keyboard Indicator applet appears on the panel. The default language should be USA for U.S. English. You can either right-click on this applet for more options or see above on how to configure.

How to type extended characters

  • Add the keyboard layout US English International (with dead keys)
  • Make US English International (with dead keys) the default keyboard layout.

The key marked ['"] is now a dead key. When you press it, nothing happens. However if you press a consonant immediately afterwards, the consonant appears with an accent.

  • ' + a = á
  • ' + e = é
  • and so on for i-í, o-ó, y-ý, c-ć, z-ź, n-ń, l-ĺ, u-ú, r-ŕ
  • " + a = ä
  • " + e = ë
  • and so on for y-ÿ, u-ü, i-ï, o-ö

Similarly, ` and a consonant generates à, è, ù, ì, ò. Similarly, ~ and a consonant generates ã, ũ, ĩ, õ, ñ.

To type ' and ", press RightAlt+' and RightAlt+" respectively. To type ' and ", you may also press '+<space> and "+<space> respectively.

There are more characters available by keeping RightAlt pressed and typing a character. Therefore,

  • RightAlt+q = ä
  • RightAlt+w = å
  • RightAlt+e = é
  • RightAlt+r = ®
  • RightAlt+t = þ
  • RightAlt+y = ü
  • RightAlt+u = ú
  • RightAlt+i = í
  • RightAlt+o = ó
  • RightAlt+p = ö
  • RightAlt+[ and ] for « and » respectively.
  • RightAlt+a = á
  • RightAlt+s = ß
  • RightAlt+d = ð
  • RightAlt+l = ø
  • RightAlt+; = ¶
  • RightAlt+: = °
  • RightAlt+z = æ
  • RightAlt+c = ©
  • RightAlt+n = ñ
  • RightAlt+m = µ
  • RightAlt+, = ç
  • RightAlt+/ = ¿
  • RightAlt+1 = ¡
  • RightAlt+2 = ²
  • RightAlt+3 = ³
  • RightAlt+4 = ¤
  • RightAlt+5 = €
  • RightAlt+6 = ¼
  • RightAlt+7 = ½
  • RightAlt+8 = ¾
  • RightAlt+9 = ‘
  • RightAlt+0 = ’
  • RightAlt+- = ¥
  • RightAlt+= = ×
  • RightAlt+! = ¹
  • RightAlt+@, then o = ő (and Ő).
  • RightAlt+#, then a = ā (and Ā). Similarly for ēĒ, ūŪ, īĪ, ōŌ.
  • RightAlt+$ = £
  • RightAlt+% =
  • RightAlt+^ =
  • RightAlt+& =
  • RightAlt+*, then a = ą (and Ą). Similarly for ęĘ, įĮ.
  • RightAlt+(, then a = ă (and Ă)
  • RightAlt+(, then g = ğ (and Ğ)
  • RightAlt+), then a = å (and Å)
  • RightAlt+_ =
  • RightAlt++ = ÷

How to set the Compose key to type special characters

  • Click System, Preferences, Keyboard.
  • Under Layout Options, expand on Compose key position.
  • Choose Right-Win key is compose, click Close.

Now you can type extended characters using the RightWin key (next to AltGr), according to this keyboard settings file. Specifically, the lines that start with GDK_Multi_key are those that we can use here. The Compose key is actually GDK_Multi_key.

Some examples,

  • RightWin + C + = produces €
  • RightWin + = + C produces €
  • RightWin + C + O produces ©
  • RightWin + O + C produces ©
  • RightWin + a + ' produces á
  • RightWin + a + " produces ä
  • RightWin + a + ` produces à
  • RightWin + a + ~ produces ã
  • RightWin + a + * produces å
  • RightWin + a + ^ produces â
  • RightWin + a + > produces â
  • RightWin + a + , produces ą
  • RightWin + e + - produces ē
  • RightWin + S + 1 produces ¹
  • RightWin + S + 2 produces ²
  • RightWin + S + 3 produces ³

How to install ubuntu-title font used in Ubuntu logo

sudo apt-get install ttf-ubuntu-title

Now you can use this font in your favorite applications

Servers

AntiVirus Server

How to install ClamAV AntiVirus Server

sudo apt-get install clamav

How to manually update virus databases

sudo freshclam

How to manually scan files/folders for viruses

sudo clamscan -r /location_of_files_or_folders

How to automatically scan files/folders for viruses

e.g. Automatically scan files/folders for viruses at midnight everyday
* * * * * means minute hour date month year
export EDITOR=gedit &&  sudo crontab -e
  • Append the following line at the end of file
00 00 * * *  sudo clamscan -r /location_of_files_or_folders
  • Save the edited file

Print Server (cupsd)

How to install cupsd

Cupsd should be automatically installed during standard instaltion. Checkout if there is a file "/etc/init.d/cupsys". If you want to manually install it, do
 sudo apt-get install cupsys*

How to add a printer

In gnome click on "System/Administration/Printing. And choose "Add printer". A "add printer wizard" should start and tell you what to do.

How to print on remote Ubuntu machine from another Ubuntu machine

  • Make sure your local printer is well configured.
  • Server ip address: 192.168.0.1
  • Client ip address: 192.168.0.23
    • Server configuration
 sudo cp /etc/cups/cupsd.conf /etc/cups/cupsd.conf.backup
 sudo gedit /etc/cups/cupsd.conf
find the block
<Location />
  ...
  Allow localhost
  ...
</Location>
and add the following line into it.
 Allow 192.168.0.23
Restart cups.
 sudo /etc/init.d/cupsys restart
    • Client configuration
 sudo cp /etc/cups/client.conf /etc/cups/client.conf.backup
 sudo gedit /etc/cups/client.conf
And add the following line into it.
 ServerName 192.168.0.1
Restart cups.
 sudo /etc/init.d/cupsys restart
Now try "lpq" and you should see something like
 vitek@lightfox:~$ lpq
 HPLJ6P is ready
 no entries

How to print on remote Ubuntu machine from a Windows machine

Samba Server

Paano maginstall ng Samba Server para sa files/folders sharing service

sudo apt-get install samba
sudo apt-get install smbfs

How to add/edit/delete network users

sudo smbpasswd -a system_username
sudo gedit /etc/samba/smbusers
    • Insert the following line into the new file
system_username = "network username"
    • Save the edited file
  • To edit network user
sudo smbpasswd -a system_username
  • To delete network user
sudo smbpasswd -x system_username

How to share home folders with read only permission (Authentication=Yes)

sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
  • Find this line
...
;  security = user
...
  • Replace with the following lines
  security = user
  username map = /etc/samba/smbusers
sudo testparm
sudo /etc/init.d/samba restart

How to share home folders with read/write permissions (Authentication=Yes)

sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
  • Find this line
...
;  security = user
...
  • Replace with the following lines
  security = user
  username map = /etc/samba/smbusers
  • Find this section
...
# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
  writable = no
...
  • Replace with the following lines
# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
  writable = yes
sudo testparm
sudo /etc/init.d/samba restart

How to share group folders with read only permission (Authentication=Yes)

sudo mkdir /home/group
sudo chmod 777 /home/group/
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
  • Find this line
...
;  security = user
...
  • Replace with the following lines
 security = user
 username map = /etc/samba/smbusers
  • Append the following lines at the end of file
[Group]
  comment = Group Folder
  path = /home/group
  public = yes
  writable = no
  valid users = system_username1 system_username2
  create mask = 0700
  directory mask = 0700
  force user = nobody
  force group = nogroup

sudo testparm
sudo /etc/init.d/samba restart

How to share group folders with read/write permissions (Authentication=Yes)


sudo mkdir /home/group
sudo chmod 777 /home/group/
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
  • Find this line
...
;  security = user
...
  • Replace with the following lines
  security = user
  username map = /etc/samba/smbusers
  • Append the following lines at the end of file
[Group]
  comment = Group Folder
  path = /home/group
  public = yes
  writable = yes
  valid users = system_username1 system_username2
  create mask = 0700
  directory mask = 0700
  force user = nobody
  force group = nogroup
sudo testparm
sudo /etc/init.d/samba restart

How to share public folders with read only permission (Authentication=Yes)


sudo mkdir /home/public
sudo chmod 777 /home/public/
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
  • Find this line
...
;  security = user
...
  • Replace with the following lines
  security = user 
  username map = /etc/samba/smbusers
  • Append the following lines at the end of file
[public]
  comment = Public Folder
  path = /home/public
  public = yes
  writable = no
  create mask = 0777
  directory mask = 0777
  force user = nobody
  force group = nogroup
sudo testparm
sudo /etc/init.d/samba restart

How to share public folders with read/write permissions (Authentication=Yes)

sudo mkdir /home/public
sudo chmod 777 /home/public/
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
  • Find this line
...
;  security = user
...
  • Replace with the following lines
  security = user
  username map = /etc/samba/smbusers
  • Append the following lines at the end of file
[public]
  comment = Public Folder
  path = /home/public
  public = yes
  writable = yes
  create mask = 0777
  directory mask = 0777
  force user = nobody 
  force group = nogroup
sudo testparm
sudo /etc/init.d/samba restart

How to share public folders with read only permission (Authentication=No)

sudo mkdir /home/public
sudo chmod 777 /home/public/
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
  • Find this line
...
;  security = user
...
  • Replace with the following line
  security = share
  • Append the following lines at the end of file
[public]
  comment = Public Folder
  path = /home/public
  public = yes
  writable = no
  create mask = 0777
  directory mask = 0777
  force user = nobody
  force group = nogroup
  • Save the edited file
sudo testparm
sudo /etc/init.d/samba restart

How to share public folders with read/write permissions (Authentication=No)

sudo mkdir /home/public
sudo chmod 777 /home/public/
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
  • Find this line
...
;  security = user
...
  • Replace with the following line
  security = share
  • Append the following lines at the end of file
[public]
  comment = Public Folder
  path = /home/public
  public = yes
  writable = yes
  create mask = 0777
  directory mask = 0777
  force user = nobody
  force group = nogroup

  • Save the edited file
sudo testparm
sudo /etc/init.d/samba restart

How to print on remote Ubuntu machine via samba

 sudo cp /etc/samba/smb.conf /etc/samba/smb.conf.backup
 gedit /etc/samba/smb.conf
Find the following lines
 ...
 # printing = cups
 # printcap name = cups
 ...
and uncomment them.
 printing = cups
 printcap name = cups
Restart cups server
 sudo /etc/init.d/cupsys restart
Now printers working on your Ubuntu machine should be acessible via samba.

SSH Server

How to install SSH Server for remote administration service

sudo apt-get install ssh

How to SSH into remote Ubuntu machine

e.g. Assumed that remote Ubuntu machine have installed SSH Server service
Read #How to install SSH Server for remote administration service
Remote Ubuntu machine: 192.168.0.1
ssh username@192.168.0.1

How to copy files/folders from remote Ubuntu machine into local machine (scp)

e.g. Assumed that remote Ubuntu machine have installed SSH Server service
Read #How to install SSH Server for remote administration service
Remote Ubuntu machine: 192.168.0.1
Remote files/folders location: /home/username/remotefile.txt
Local machine save location: . (current directory)
scp -r username@192.168.0.1:/home/username/remotefile.txt .

How to copy files/folders from local machine into remote Ubuntu machine (scp)

e.g. Assumed that remote Ubuntu machine have installed SSH Server service
Read #How to install SSH Server for remote administration service
Local files/folders location: localfile.txt
Remote Ubuntu machine: 192.168.0.1
Remote Ubuntu machine save location: /home/username/
scp -r localfile.txt username@192.168.0.1:/home/username/

How to copy files/folders from remote Ubuntu machine into local machine (rsync)

e.g. Assumed that remote Ubuntu machine have installed SSH Server service
Read #How to install SSH Server for remote administration service
Remote Ubuntu machine: 192.168.0.1
Remote files/folders location: /home/username/remotefile.txt
Local machine save location: . (current directory)
rsync -v -u -a --delete --rsh=ssh --stats username@192.168.0.1:/home/username/remotefile.txt .

How to copy files/folders from local machine into remote Ubuntu machine (rsync)

e.g. Assumed that remote Ubuntu machine have installed SSH Server service
Read #How to install SSH Server for remote administration service
Local files/folders location: localfile.txt
Remote Ubuntu machine: 192.168.0.1
Remote Ubuntu machine save location: /home/username/
rsync -v -u -a --delete --rsh=ssh --stats localfile.txt username@192.168.0.1:/home/username/

How to mount remote folders into local Ubuntu machine (sshfs)

e.g. Assumed that remote machine has installed SSH Server service
Read #How to install SSH Server for remote administration service
Remote machine: 192.168.0.1
Remote machine folder location: /media/music
  • Install sshfs
sudo apt-get install sshfs
  • Load kernel driver for sshfs
sudo modprobe fuse
  • For permanent use add 'fuse' at the end of /etc/modules
sudo gedit /etc/modules
  • Join the 'fuse' user group
sudo adduser your_user_name fuse
  • Create local mountpoint in your home directory
mkdir ~/remote_music
  • Mount the remote folder into ~/remote_music
sshfs 192.168.0.1:/meida/music ~/remote_music

How to SSH into remote Ubuntu machine via Windows machine

e.g. Assumed that remote Ubuntu machine have installed SSH Server service
Read #How to install SSH Server for remote administration service
  • Download PuTTY: Here


How to copy files/folders from/into remote Ubuntu machine via Windows machine

e.g. Assumed that remote Ubuntu machine have installed SSH Server service
Read #How to install SSH Server for remote administration service
  • Download FileZilla: Here

How to limit the user accounts that can connect through ssh remotely

e.g. If you enable the SSH server, then any user with a valid account can connect remotely
This can lead to security risks, as there exist remote password cracking tools that
try common username/password pairs.
  • Keep a backup of the ssh server configuration file with

sudo cp /etc/ssh/sshd_config /etc/ssh/sshd_config.ORIGINAL

  • Edit the configuration file

sudo gedit /etc/ssh/sshd_config

  • Change the parameter PermitRootLogin from yes to no. The superuser must not be able to connect directly from remote.
  • Add the parameter AllowUsers and specify the usernames (space separated) that can connect remotely.
  • You can also use DenyUsers for fine-grained selection of users.
  • If you enable the openssh server and you have no intention for now to enable remote connections, you may add AllowUsers nosuchuserhere to disable anyone connecting.

DHCP Server

How to install DHCP Server for automatic IP addresses assignment

e.g. Assumed that "eth0" is the interface for network card
IP Address Range: 192.168.0.100 to 192.168.0.200
Subnet Mask: 255.255.255.0
DNS Servers: 202.188.0.133, 202.188.1.5
Domains: tm.net.my
Gateway Address: 192.168.0.1
sudo apt-get install dhcp3-server
sudo cp /etc/default/dhcp3-server /etc/default/dhcp3-server_backup
sudo gedit /etc/default/dhcp3-server
  • Find this line
...
INTERFACES=""
  • Replace with the following line
INTERFACES="eth0"
  • Save the edited file
sudo cp /etc/dhcp3/dhcpd.conf /etc/dhcp3/dhcpd.conf_backup
sudo gedit /etc/dhcp3/dhcpd.conf
  • Find this section
...
# option definitions common to all supported networks...
option domain-name "example.org";
option domain-name-servers ns1.example.org, ns2.example.org;
default-lease-time 600;
max-lease-time 7200;
...
  • Replace with the following lines
# option definitions common to all supported networks...
#option domain-name "example.org";
#option domain-name-servers ns1.example.org, ns2.example.org;
#default-lease-time 600;
#max-lease-time 7200;
  • Find this section
...
# A slightly different configuration for an internal subnet.
#subnet 10.5.5.0 netmask 255.255.255.224 {
# range 10.5.5.26 10.5.5.30;
# option domain-name-servers ns1.internal.example.org;
# option domain-name "internal.example.org";
# option routers 10.5.5.1;
# option broadcast-address 10.5.5.31;
# default-lease-time 600;
# max-lease-time 7200;
#}
...
  • Replace with the following lines
# A slightly different configuration for an internal subnet.
subnet 192.168.0.0 netmask 255.255.255.0 {
 range 192.168.0.100 192.168.0.200;
 option domain-name-servers 202.188.0.133, 202.188.1.5;
 option domain-name "tm.net.my";
 option routers 192.168.0.1;
 option broadcast-address 192.168.0.255;
 default-lease-time 600;
 max-lease-time 7200;
}
  • Save the edited file
sudo /etc/init.d/dhcp3-server restart


Database Server

How to install MYSQL Database Server

sudo apt-get install mysql-server
  • MySQL initially only allows connections from the localhost (127.0.0.1). We'll need to remove that restriction if you wish to make it accessible to everyone on the internet. Open the file /etc/mysql/my.cnf
sudo gedit /etc/mysql/my.cnf
  • Find the line bind-address = 127.0.0.1 and comment it out
...
#bind-address           = 127.0.0.1
...
  • MySQL comes with no root password as default. This is a huge security risk. You'll need to set one. So that the local computer gets root access as well, you'll need to set a password for that too. The local-machine-name is the name of the computer you're working on. For more information see here
mysqladmin -u root password your-new-password
mysqladmin -h root@local-machine-name -u root password your-new-password
sudo /etc/init.d/mysql restart

How to install MYSQL Administrator

sudo apt-get install mysql-admin

Apache HTTP Server

How to install Apache HTTP Server for HTTP (Web) Server service

sudo apt-get install apache2

How to install PHP for Apache HTTP Server

How to install PHP4
sudo apt-get install php4
sudo apt-get install libapache2-mod-php4
sudo /etc/init.d/apache2 restart
  • To test if php4 installed correctly
sudo gedit /var/www/testphp.php
  • Insert the following line into the new file
<?php phpinfo(); ?>
How to install PHP5
sudo apt-get install php5
sudo apt-get install libapache2-mod-php5
sudo /etc/init.d/apache2 restart
  • To test if php5 installed correctly
sudo gedit /var/www/testphp.php
  • Insert the following line into the new file
<?php phpinfo(); ?>

How to install MYSQL for Apache HTTP Server

sudo apt-get install libapache2-mod-auth-mysql
  • Select either php4-mysql or php5-mysql depending on which version of PHP you installed
sudo apt-get install php<version-number>-mysql
sudo apt-get install phpmyadmin
  • To get PHP to work with MySQL, open the file (where <version> is either 4 or 5 depending on which PHP you installed)
sudo gedit /etc/php<version>/apache2/php.ini
  • You'll need to uncomment the ";extension=mysql.so" line so that it looks like this
...
extension=mysql.so
...
  • Save the file then exit
sudo /etc/init.d/apache2 restart

How to map URLs to folders outside /var/www/

sudo gedit /etc/apache2/conf.d/alias
  • Insert the following lines into the new file
Alias /URL-path /location_of_folder/
<Directory /location_of_folder/>
  Options Indexes FollowSymLinks
  AllowOverride All
  Order allow,deny
  Allow from all
</Directory>
  • Save the edited file
sudo /etc/init.d/apache2 restart

How to change the default port number for Apache HTTP Server

e.g. Assumed that new port number is 78
sudo cp /etc/apache2/ports.conf /etc/apache2/ports.conf_backup
sudo gedit /etc/apache2/ports.conf
  • Find this line
Listen 80
  • Replace with the following line
Listen 78
  • Save the edited file
sudo /etc/init.d/apache2 restart

How to parse RSS into PHP for Apache HTTP Server

e.g. Assumed that RSS is DistroWatch.com - News
wget -c http://easylinux.info/uploads/magpierss-0.71.1.tar.gz
sudo mkdir /var/www/feeds
sudo tar zxvf magpierss-0.71.1.tar.gz -C /var/www/feeds/
sudo mv /var/www/feeds/magpierss-0.71.1/* /var/www/feeds/
sudo rm -fr /var/www/feeds/magpierss-0.71.1/
sudo chown -R www-data:root /var/www/feeds/
sudo gedit /var/www/feeds/index.php
  • Insert the following lines into the new file
 <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
 
 <html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
 
 <head>
 
 <title>DistroWatch.com - News</title>
 
 <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
 
 <style type="text/css">
 /*<![CDATA[*/
 /* 
 DEFAULT TAG STYLES
 */
 
 body {
  background: #ffffff;
  margin-left: 20px;
  font-family: bitstream vera sans,sans-serif;
  font-size: 9pt;
 }
 
 h1 {
  font-family: luxi sans,sans-serif;
  font-size: 15pt;
 }
 
 /*]]>*/
 </style>
 
 </head>
  
 <body>
 
 <?php

 require_once 'rss_fetch.inc';
 error_reporting(E_ERROR);
 
 $url = 'http://distrowatch.com/news/dw.xml';
 $rss = fetch_rss($url);
 
 if ($rss) {
 
  echo "<h1>";
  echo "<a href=$url>", $rss->channel[title], "</a><br/>";
  echo "</h1>";
 
  foreach ($rss->items as $item ) {
   $url = $item[link];
   $title = $item[title];
   $description = $item[description];
   echo "<li>";
   echo "<b>Topic:</b> <a href=$url><b><u>$title</u></b></a><br/><br/>";
   echo "$description<br/><br/>";
   echo "</li>";
  }
 
 }
 else {
  echo "<a href=$url>", $url, "</a> - Server Down!<br/>";
 }
 
 ?>
 
 </body>
 
 </html>
 

FTP Server

How to install FTP Server for File Transfer service

sudo apt-get install proftpd

How to configure FTP user to be "jailed" (chrooted) into their home directory

sudo cp /etc/proftpd.conf /etc/proftpd.conf_backup
sudo gedit /etc/proftpd.conf
  • Find this section
...
DenyFilter           \*.*/
...
  • Add the following line below it
DefaultRoot           ~

  • Save the edited file
sudo /etc/init.d/proftpd restart

How to configure FTP Server to allow anonymous FTP user to read only

sudo cp /etc/proftpd.conf /etc/proftpd.conf_backup
sudo gedit /etc/proftpd.conf
  • Append the following lines at the end of file
<Anonymous ~ftp>
 User            ftp
 Group            nogroup
 UserAlias          anonymous ftp
 DirFakeUser on ftp
 DirFakeGroup on ftp
 RequireValidShell      off
 MaxClients         10
 DisplayLogin        welcome.msg
 DisplayFirstChdir      .message
 <Directory *>
  <Limit WRITE>
   DenyAll
  </Limit>
 </Directory>
</Anonymous>
  • Save the edited file
sudo /etc/init.d/proftpd restart

How to configure FTP Server to allow anonymous FTP user to read/write

sudo cp /etc/proftpd.conf /etc/proftpd.conf_backup
sudo gedit /etc/proftpd.conf
  • Append the following lines at the end of file
<Anonymous ~ftp>
 User            ftp
 Group            nogroup
 UserAlias          anonymous ftp
 DirFakeUser on ftp
 DirFakeGroup on ftp
 RequireValidShell      off
 MaxClients         10
 DisplayLogin        welcome.msg
 DisplayFirstChdir      .message
</Anonymous>
  • Save the edited file
sudo /etc/init.d/proftpd restart

How to map anonymous FTP user to folders outside /home/ftp/

sudo cp /etc/proftpd.conf /etc/proftpd.conf_backup
sudo gedit /etc/proftpd.conf
  • Append the following lines at the end of file
<Anonymous /location_of_folder/>
 User            ftp
 Group            nogroup
 UserAlias          anonymous ftp
 DirFakeUser on ftp
 DirFakeGroup on ftp
 RequireValidShell      off
 MaxClients         10
 DisplayLogin        welcome.msg
 DisplayFirstChdir      .message
 <Directory *>
  <Limit WRITE>
   DenyAll
  </Limit>
 </Directory>
</Anonymous>
  • Save the edited file
sudo /etc/init.d/proftpd restart

How to change the default port number for FTP Server

e.g. Assumed that new port number is 77
sudo cp /etc/proftpd.conf /etc/proftpd.conf_backup
sudo gedit /etc/proftpd.conf
  • Find this line
Port              21
  • Replace with the following line
Port              77
  • Save the edited file
sudo /etc/init.d/proftpd restart

How to ftp into remote Ubuntu machine via Windows machine

e.g. Assumed that remote Ubuntu machine have installed FTP Server service
Read #How to install FTP Server for File Transfer service
  • Download FileZilla: Here

Streaming Media Server

How to install GNUMP3d for Streaming Media Server service

e.g. /var/music/ is the directory containing multimedia files
sudo apt-get install gnump3d

How to change the default directory containing multimedia files for GNUMP3d

e.g. Assumed that new directory containing multimedia files is /home/music/
sudo cp /etc/gnump3d/gnump3d.conf /etc/gnump3d/gnump3d.conf_backup
sudo gedit /etc/gnump3d/gnump3d.conf
  • Find this line
root = /var/music
  • Replace with the following line
root = /home/music
  • Find this line
user = gnump3d
  • Replace with the following line
user = root
  • Save the edited file
sudo /etc/init.d/gnump3d restart

How to change the default port number for GNUMP3d

e.g. Assumed that new port number is 7878
sudo cp /etc/gnump3d/gnump3d.conf /etc/gnump3d/gnump3d.conf_backup
sudo gedit /etc/gnump3d/gnump3d.conf
  • Find this line
port = 8888
  • Replace with the following line
port = 7878
  • Save the edited file
sudo /etc/init.d/gnump3d restart


Image Gallery Server

  • For a comparison between Gallery1 and Gallery2 see here

Gallery1

How to install Gallery1 for Image Gallery Server service
sudo apt-get install gallery (when prompted to restart Apache, choose No or Cancel)
sudo apt-get install imagemagick
sudo apt-get install jhead
sudo apt-get install libjpeg-progs
sudo /etc/init.d/apache2 restart
sudo sh /usr/share/gallery/configure.sh
Gallery Configuration Wizard: Step 1
Next Step ->
Gallery Configuration Wizard: Step 2
General settings Tab ->
Admin password: Specify the password

Locations and URLs Tab ->
Album directory: /var/www/albums/
Temporary directory: /tmp/
Gallery URL: http://localhost/gallery
Albums URL: http://localhost/albums
Next Step -->
Gallery Configuration Wizard: Step 3
Next Step -->
Gallery Configuration Wizard: Step 4
Save Config ->
How to configure Gallery1 to be accessible via Internet (Hostname or fix IP) or LAN (fix IP)
e.g. Assumed that network and internet connections have been configured properly
Internet (Hostname or fix IP) or LAN (fix IP): http://www.url.com
sudo cp /etc/gallery/config.php /etc/gallery/config.php_backup
sudo gedit /etc/gallery/config.php
  • Find this section
...
$gallery->app->photoAlbumURL = "http://localhost/gallery";
$gallery->app->albumDirURL = "http://localhost/albums";
...
  • Replace with the following lines
$gallery->app->photoAlbumURL = "http://www.url.com/gallery";
$gallery->app->albumDirURL = "http://www.url.com/albums";
How to configure Gallery1 to be accessible via LAN (dynamic IP)
e.g. Assumed that network connections have been configured properly
LAN (dynamic IP): 192.168.0.1
sudo cp /etc/gallery/config.php /etc/gallery/config.php_backup
sudo gedit /etc/gallery/config.php
  • Find this section
...
$gallery->app->photoAlbumURL = "http://localhost/gallery";
$gallery->app->albumDirURL = "http://localhost/albums";
...
  • Replace with the following lines
$gallery->app->photoAlbumURL = "/gallery";
$gallery->app->albumDirURL = "/albums";
How to backup/restore Gallery1 data
sudo tar zcvf gallery.tgz /var/www/albums/ /etc/gallery/
  • To restore Gallery data
sudo tar zxvf gallery.tgz -C /

Gallery2

How to install Gallery2
How to configure Gallery2

Troubleshooting

Configuring network interfaces... (taking too long to load)

Synchronizing clock to ntp.ubuntulinux.org... (taking too long to load)

service_name = ntpdate

How to disable system time/date from being reset to UTC (GMT)

sudo cp /etc/default/rcS /etc/default/rcS_backup
sudo gedit /etc/default/rcS
  • Find this line
...
UTC=yes
...
  • Replace with the following line
UTC=no
  • Save the edited file
  • System -> Administration -> Time and Date
Set the correct time/date
sudo /etc/init.d/hwclock.sh restart

How to configure sound to work properly in GNOME

sudo killall esd
sudo cp /etc/esound/esd.conf /etc/esound/esd.conf_backup
sudo gedit /etc/esound/esd.conf
  • Find this section
...
auto_spawn=0
spawn_options=-terminate -nobeeps -as 5
...
  • Replace with the following lines
auto_spawn=1
spawn_options=-terminate -nobeeps -as 2 -d default
  • Save the edited file
sudo apt-get install libesd-alsa0
sudo gedit /etc/asound.conf
  • Insert the following lines into the new file
pcm.card0 {
type hw
card 0
}

pcm.!default {
type plug
slave.pcm "dmixer"
}

pcm.dmixer {
type dmix
ipc_key 1025
slave {
pcm "hw:0,0"
period_time 0
period_size 2048
buffer_size 32768
rate 48000
}
bindings {
0 0
1 1
}
}
  • Save the edited file
sudo ln -fs /usr/lib/libesd.so.0 /usr/lib/libesd.so.1
System -> Preferences -> Sound
Sound preferences
General Tab -> Sounds for events (Un-Checked)
  • Save and close all opened applications, Reboot computer

How to forcefully empty Trash in GNOME

sudo rm -fr $HOME/.Trash/

How to remove duplicate menu/menu items in GNOME

rm -f $HOME/.config/menus/applications.menu

How to refresh Places menu in GNOME (if mounts to /media/ in /etc/fstab does not show up)

sudo /etc/init.d/dbus-1 restart

How to consume static (not dhcp) wireless LAN (WLAN) connection (KDE)

  • I assume you have successfully consumed WLAN connection in Windows
  • To enable the network device please follow the following steps
  • Go to K-menu -> System Settings -> Network Settings
  • Enable Administrator mode
  • Select Network Interfaces tab and the wireless interface (usually ath0) to configure
  • Click Configure Interface...
  • Choose Manual or Automatic. Choose Manual
  • Fill the preferred IP address to identify your computer and the netmask. Choose to activate when computer starts
  • Click Advanced Settings to for more properties
  • Select Routes tab and fill the gateway IP address
  • Make sure you choose the correct device in the right dropdown (e.g. ath0)
  • Click apply to commit all changes
  • To choose wireless connection please follow the following steps
  • Go to K-menu -> Internet -> Wireless Assistant
  • Right click on preferred connection ssid
  • Choose and complete fields for Manual connection
  • Click Ok
  • Create connection configuration
sudo gedit /etc/wpa_supplicant.conf
  • Insert the following lines into the new file
network={
ssid="YOUR_PREFERRED_CONNECTION_SSID"
scan_ssid=1
proto=WPA
key_mgmt=WPA-PSK
psk="STRING_TO_GENERATE_PASSWORD"
#psk=123456789 #you have option to use connection key instead of connection password
}
  • Save the edited file
  • Create script to easily activate connection
sudo gedit /etc/init.d/wifi_wpa.sh
  • Insert the following lines into the new file
#! /bin/sh
# wifi: wpa_supplicant init
echo " * [Wifi]: Enabling WPA supplicant..."
if [ -x /sbin/wpa_supplicant ]; then
/sbin/wpa_supplicant -B -i ath0 -c /etc/wpa_supplicant.conf -D madwifi -w
fi
exit 0
  • Save the edited file
  • Make sure both file readable and executable
sudo chmod +r /etc/wpa_supplicant.conf
sudo chmod +x /etc/init.d/wifi_wpa.sh
  • make wireless connection automaticaly starts when computer starts
sudo ln -s /etc/init.d/wifi_wpa.sh /etc/rcS.d/S40netwifiwpa
  • Close all opened applications, Reboot computer

Upgrading Ubuntu

Paano mag-upgrade mula Hoary Hedgehog -> Breezy Badger -> Dapper Drake

  • Una, siguraduhing ikaw ay fully upgraded:
sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
  • Kung wala kang CD na magagamit SIGURADUHING i-comment/tanggalin ang line na tumutukoy sa iyong CD media
sudo gedit /etc/apt/sources.list

/etc/apt/sources.list

para sa upgrade papunta sa breezy ang iyong sources.list ay dapat katulad nito:

## Uncomment the following two lines to fetch updated software from the network
deb http://us.archive.ubuntu.com/ubuntu breezy main restricted
deb-src http://us.archive.ubuntu.com/ubuntu breezy main restricted

## Uncomment the following two lines to fetch major bug fix updates produced
## after the final release of the distribution.
deb http://us.archive.ubuntu.com/ubuntu breezy-updates main restricted
deb-src http://us.archive.ubuntu.com/ubuntu breezy-updates main restricted

## Uncomment the following two lines to add software from the 'universe'
## repository.
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## universe WILL NOT receive any review or updates from the Ubuntu security
## team.
deb http://us.archive.ubuntu.com/ubuntu breezy universe deb-src http://us.archive.ubuntu.com/ubuntu breezy universe deb http://security.ubuntu.com/ubuntu breezy-security main restricted deb-src http://security.ubuntu.com/ubuntu breezy-security main restricted deb http://security.ubuntu.com/ubuntu breezy-security universe deb-src http://security.ubuntu.com/ubuntu breezy-security universe</div>


  • Para mag-upgrade mula breezy papuntang dapper, palitan lamang (ctrl+h) ang lahat ng 'breezy' ng 'dapper' sa /etc/apt/sources.list
  • I-save ang file.
sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
  • I-save ang iyong session, reboot, at mag-enjoy.

Pahintulot:

  • HINDI ko po ipinapayong mag-upgrade diretso mula hoary papuntang dapper. Upgrade: hoary->breezy->dapper

How to upgrade from Dapper Drake to Edgy Eft (experimental)

  • coming soon...

Removed Topics

  • Topics that have been removed from this guide can be found here
Personal tools
Sponsor
  System76